Pioneer DEH-P90DAB - Manual (Page 4)

Cap (1*)
When not using this terminal,
do not remove the cap.
ISO connector
Fuse resistor
1*
2*
4*
3*
5*
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
Black (ground)
To vehicle (metal) body.
Connect leads of the same
color to each other.
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to
connect to both connectors.
Fuse resistor Orange/white
To lighting switch terminal.
Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
Fuse holder
Antenna jack
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Multi-CD player
(sold separately)
15 cm
DAB antenna
Use only Pioneer product
(e.g. AN-70DAB or AN-75DAB).
If not, it may cause malfunction.
3
Connecting the Units
7
Basic Connection