Pioneer XW-BTS5-W - Manual (Page 5)

5
English 1. Accessory Check Up
Check the following items when opening the package:
• AC adapter × 1 (include Power Plug × 1)
• Speaker cable × 1
• Rubber foot × 8
• Warranty card × 1
• Operating Instructions (This Document)
2. Connect the Left and Right Speaker
1.Unscrew the terminal a few turns until there is enough space to insert the exposed wire.
2.Connect the wire with a red belt to the red (+) terminal, and the wire with a black belt to
the black (−) terminal.
3.Once the wire is in position, tighten the terminal until the wire is firmly clamped.
4.Connect the pin plug to the SPEAKER OUT Jack of the right speaker.
Note
• To avoid magnetic interference or unwanted noise, never place this product too close to
any radiation devices.
Before Start
Rear side of Right Speaker Rear side of Left Speaker
Speaker cable
SPEAKER OUT Jack