Pioneer SC-LX78-K User Manual

Page 43

Advertising
background image

43

Connecting your equipment

03

Connecting to the network through LAN interface

By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
your computer.

LAN (10/100)

LAN

(10/100)

WAN

3

2

1

LAN

Internet

Modem

Router

LAN cable (sold separately)

to LAN port

to LAN port

Computer

NAS

Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see

Network Setup menu

on

page 106

.

LAN terminal specifications

! LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)

Notes

! Refer to the operation manual of the equipment you have as the connected equipment and connection method

may differ depending on your Internet environment.

! When using a broadband Internet connection, a contract with an Internet service provider is required. For

more details, contact your nearest Internet service provider.

Connecting an iPod

This receiver has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod
using the controls of this receiver.

HDMI 5 INPUT

AUTO/ALC/

DIRECT

STATUS

BAND

TUNER EDIT

iPod iPhone

DIRECT CONTROL

5V 1 A

USB cable included with the iPod

iPod/iPhone

Tip

! An iPod/iPhone can be connected to the receiver. For details on supported models and versions of the respec-

tive products, see

Playing an iPod

on

page 56

.

% Switch the receiver into standby, and then use the iPod cable to connect your iPod to the
iPod/iPhone terminal on the front panel of this receiver.

! For the cable connection, also refer to the operating instructions for your iPod.
! When connecting an iPhone to this unit, keep the iPhone at least 20 cm away from this unit. If the iPhone is

kept closer to this unit and a telephone call is received by the iPhone, noise may be output from this device.

! iPod recharging occurs whenever an iPod is connected to this unit. (Recharging is enabled only when the

unit’s power is turned on.)

! For instructions on playing the iPod, see

Playing an iPod

on

page 56

.

 
 

 

 

Advertising
This manual is related to the following products: