04 getting started, To turn the power on, Setting the clock – Pioneer X-SMC55DAB-S User Manual

Page 14: General control, Input function, Network function, Display brightness control, Volume auto setting, Volume control, Getting started

Advertising
background image

Getting started

04

14

En

Chapter 4:

Getting started

To turn the power on

Press the  STANDBY/ON to turn the power on.

About startup time:

About 30 seconds are required between after the power turns

on until the unit is actually ready to use. The time required for

startup can be reduced by setting the quick start mode to on.

After use:

Press the  STANDBY/ON to enter the power stand-by mode.

Note

• In standby mode, if iPod/iPhone/iPad is connected, the

unit turns charge mode.

Setting the clock

1

Press

STANDBY/ON to turn the power on.

2

Press CLOCK on the remote control.

“CLOCK” is shown on the main display.

3

Press ENTER.

4

Press

/ to set the day, then press ENTER.

5

Press

/ to set the hour, then press

ENTER.

6

Press

/ to set the minute, then press

ENTER to confirm.

7

Press ENTER.

To confirm the time display:

Press the CLOCK. The time display will appear for about 10

seconds.

To readjust the clock:

Perform “Setting the clock” from step 1.

Note

• When power supply is restored after unit is plugged in

again or after a power failure, reset the clock.

General control

Input function

When the INPUT on main unit is pressed, the current function

will change to different mode. Press the INPUT repeatedly to

select desired function.

Network function

When pressing NETWORK on the remote control, the current

network function will change to different network mode.

Press the NETWORK repeatedly to select desired network

function. The selected function is displayed on the front panel

display.

Display brightness control

Press DIMMER to dims the display brightness. The

brightness can be controlled in four steps.

Volume auto setting

If you turn off and on the main unit with the volume set to 31

or higher, the volume starts at 30.

Volume control

Press the VOLUME –/+ on the unit or press VOLUME +/– on

the remote control to increase or decrease the volume.

CAUTION

• The sound level at a given volume setting depends on

speaker efficiency, location, and various other factors. It

is advisable to avoid exposure to high volume levels. Do

not turn the volume on to full at switch on. Listen to

music at moderate levels. Excessive sound pressure

from earphones and headphones can cause hearing

loss.

STANDBY/ON

CD

USB

TUNER

TIMER

1

2

3

iPod

AUDIO IN

SLEEP

EQUALIZER

CLOCK

NETWORK

DISPLAY

FOLDER

MENU

PRESET

VOLUME

TUNE–

TUNE+

MEMORY

/PROGRAM

ENTER

CD

FM

IPOD

AUDIO IN

FAVORITE

USB/

IPOD

I RADIO

M SERVER

DAB

I RADIO

FAVORITE

M SERVER

X-SMC55DAB-S_VXE8_En.book 14 ページ 2013年7月30日 火曜日 午前9時4分

Advertising