Headphones – Pioneer X-HM10-S User Manual

Page 23

Advertising
background image

11/5/25

X-HM10_20_En.fm

9

8

7

6

5

4

3

2

1

En-23

Timer and sleep operation (Remote

control only) (continued)

The radio, compact disc, iPod, USB and Line In can all be

turned off automatically.

To confirm the remaining sleep time:

To cancel the sleep operation:

Press the STANDBY/ON button whilst “SLEEP” is

indicated. To cancel the sleep operation without setting the

unit to the stand-by mode, proceed as follows.

Sleep and timer playback:

For example, you can fall asleep listening to the radio and

wake up to CD in the next morning.

Headphones

l

Do not turn the volume on to full at switch on and listen

to music at moderate levels. Excessive sound pressure

from earphones and headphones can cause hearing

loss.

l

Before plugging in or unplugging the headphone,

reduce the volume.

l

Be sure your headphone has a 3.5 mm diameter plug

and impedance between 16 and 50 ohms. The

recommended impedance is 32 ohms.

l

Plugging in the headphone disconnects the speakers

automatically. Adjust the volume using the VOLUME

control.

l

X-HM20 only: Audio from the iPod/iPhone cannot be

heard via the headphones connected to the unit. “HP

INVALID” will be displayed if you connect the

headphones when the iPod/iPhone function is

selected.

n

Sleep operation

1

Play back the desired sound source.

2

Press the SLEEP button.

3

Within 5 seconds, press the Numeric button to set the

time (1 minute - 99 minutes)

4

“SLEEP” will appear.

5

The unit will enter the power stand-by mode

automatically after the preset time has elapsed. The

volume will be turned down 1 minute before the sleep

operation finishes.

1

Whilst “SLEEP” is indicated, press the SLEEP button.

1

Whilst “SLEEP” is indicated, press the SLEEP button.

2

Within 5 seconds, press the “0” button twice until

“SLEEP 00” appears.

n

To use timer and sleep operation together

1

Set the sleep time (see above, steps 1 - 5).

2

Whilst the sleep timer is set, set the timer playback

(steps 2 - 9, page 22).

Desired time

1-99 minutes

Sleep operation will

automatically stop

Sleep timer

setting

Timer playback

setting

End

time

Timer playback

start time

Advertising
This manual is related to the following products: