Pioneer CMX-3000 - Manual (Page 9)

<DRB1307>
9
6 Time mode/Auto cueing button (*)
(TIME MODE/AUTO CUE)
TIME MODE:
Pressing this button causes the elapsed time and remaining
time (REMAIN) of the current track to be displayed in
succession on the time display of the display unit.
AUTO CUE: (see p. 12)
7 TRACK SEARCH button ( 4, ¢)
(see p. 12)
8 SEARCH button ( 1, ¡)
(see p. 13)
9 CUE button and indicator (*)
Cueing point settings (see p. 13)
Cueing point sampler (see p. 13)
Back cueing (see p. 13)
Cueing point adjust (see p. 13)
0 PLAY/PAUSE button ( 3 8) and indicator
(see p. 12)
- JOG MODE button (*)
Each time this button is pressed, the jog mode switches
alternately between CDJ jog mode and SCRATCH jog mode.
= Display
~ Jog dial (+ FWD/– REV) (*)
(see p. 14)
! TAP button (*)
When pressed during playback, the BPM counter switches to
manual mode, and the BPM value is calculated from the
interval at which the TAP button is pressed. A BPM value in
the range 40 to 199 BPM (varies with the tempo change rate)
can be entered when the tempo change rate is 0%.
@ AUTO button (*)
Press for automatic BPM count
# BPM synchro button (BPM SYNC) and indicator (*)
(see p. 17)
Each time the button is pressed, switches BPM synchro
function ON/OFF. BMP SYNC indicator flashes during ON,
and lights steadily when OFF.
$ RELAY PLAY button and indicator (*) (see p. 18)
% HOT CUE recording mode button (REC) and
indicator (*) (see p. 15)
Press to switch the HOT CUE button’s function (record/
access). In the record mode, the indicator lights.
^ HOT CUE buttons (1, 2, 3) and indicator (*) (see p. 15)
Use to select the memory (1, 2, 3) into which you wish to
program hot cue point information and loop information.
Read before use (Panel facilities)
Display
1 TRACK number display
Displays the track number of the track currently being played.
2 Playback speed display
Tempo control range display (±6, ±10, ±16, WIDE)
Displays the variable range mode of the tempo control slide.
MASTER indicator
MASTER indicator on the master player lights during BPM
synchro play.
Tempo change rate display
Displays the rate of change of the tempo as specified using
the tempo control slide.
3 Ring display
During relay play, displays disc rotation status. During BPM
synchro mode, the display occurs in rhythm with the beat.
4 Auto cueing indicator (A. CUE)
Lights up when auto cueing is turned on.
5 SCRATCH indictor
When jog mode is set to “SCRATCH,” flashes during write to
the scratch memory, and lights steadily when data is fully
written to the memory.
6 EMERGENCY LOOP indicator
Flashes during loop play in the Emergency Loop mode.
7 RELOOP indicator
Lights to indicate loop play is possible, and during loop play.
8 LOOP indicator
Lights during loop play.
9 Automatic BPM Count indicator (AUTO)
Lights during automatic BPM count mode.
0 TAP mode indicator
Lights during TAP BPM count mode. Indicator goes out for
approximately 0.2 second the instant TAP button is pressed.
- Time display
Used to display the elapsed playback time (when the
REMAIN indicator is unlit) or the remaining playback time
(when the REMAIN indicator is lit) of the current track in
minutes (M), seconds (S), and frames (F).
= WAVE Display / Character Display
During WAVE display, indicates the volume level of the
currently playing track. During character display, displays CD
TEXT. Characters displayable are limited to alphabet,
numerals, and certain symbols. The array displays either the
disc title or the track title. When disc title is displayed, the
mark lights.
~ Playback position display
Used to display a full-scale bar graph for the track being
played to make it possible to get an intuitive feel of the
elapsed and remaining play time.
÷ Display as it appears when displaying elapsed time:
All indicators unlit and then indicators light up in
sequence from left
÷ Display as it appears when displaying remaining time:
All indicators lit and then indicators are turned off in
sequence from left
÷ Display as it appears when there are less than 30 seconds
remaining in a track:
Slow flashing
÷ Display as it appears when there are less than 15 seconds
remaining in a track:
Rapid flashing
! BPM display
Used to display the number of BPM for the current track.
Note that it may not be possible to count BPM in the
automatic BPM count mode for some tracks. Then use the
TAP BPM count mode to do this.