Analog audio cables, Digital audio cables, Video cables – Pioneer VSX-821 User Manual

Page 14: Connecting your equipment 02

Advertising
background image

Connecting your equipment

02

14

En

02

• 3D, Deep Color, x.v.Color signal transfer and Audio

Return Channel are only possible when connected to a
compatible component.

• HDMI format digital audio transmissions require a longer

time to be recognized. Due to this, interruption in the
audio may occur when switching between audio formats
or beginning playback.

• Turning on/off the device connected to this unit’s HDMI

OUT terminal during playback, or disconnecting/
connecting the HDMI cable during playback, may cause
noise or interrupted audio.

HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC in the United States and other countries.

“x.v.Color” and

are trademarks of Sony

Corporation.

Analog audio cables

Use stereo RCA phono cables to connect analog audio
components. These cables are typically red and white, and
you should connect the red plugs to R (right) terminals and
white plugs to L (left) terminals.

Digital audio cables

Commercially available coaxial digital audio cables or optical
cables should be used to connect digital components to this
receiver.

Note

• When connecting optical cables, be careful when

inserting the plug not to damage the shutter protecting
the optical socket.

• When storing optical cable, coil loosely. The cable may be

damaged if bent around sharp corners.

• You can also use a standard RCA video cable for coaxial

digital connections.

Video cables

Standard RCA video cables
These cables are the most common type of video connection
and are used to connect to the composite video terminals.
The yellow plugs distinguish them from cables for audio.

Component video cables
Use component video cables to get the best possible color
reproduction of your video source. The color signal of the TV
is divided into the luminance (

Y) signal and the color (P

B

and

P

R

) signals and then output. In this way, interference between

the signals is avoided.

L

R

AUDIO

White (Left)

Red (Right)

COAXIAL

IN

OPTICAL

IN

Coaxial digital

audio cable

Optical cable

VIDEO

Yellow

Y

P

B

P

R

COMPONENT

VIDEO

Green (Y)

Red (P

R

)

Blue (P

B

)

VSX-821_826_SYXCN_En.book 14 ページ 2011年2月9日 水曜日 午後3時48分

Advertising
This manual is related to the following products: