Pioneer AVH-X2600BT - Manual (Page 68)

1 Turn the source off.
Refer to Turning the source ON/OFF on page
10.
2 Press the home button to switch to the
home display.
3 Touch the system key to open the sys-
tem menu.
4 Touch BT Software Update.
5 Touch Start to display the data transfer
mode.
# Follow the on-screen instructions to finish up-
dating the Bluetooth software.
Displaying the Bluetooth
software version
If this unit fails to operate properly, you may
need to consult your dealer for repair. In such
cases, you may be asked to specify the soft-
ware version. Perform the following procedure
to check the version on this unit.
1 Turn the source off.
Refer to Turning the source ON/OFF on page
10.
2 Press the home button to switch to the
home display.
3 Touch the system key to open the sys-
tem menu.
4 Touch Bluetooth Version Information to
display to the version of the Bluetooth
module of this unit.
Setting the Bluetooth safe
mode
Refer to Setting the Bluetooth safe mode on
page 74.
Setting the rear view
camera (back up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror-reversed images.
Otherwise, the screen image will appear re-
versed.
This unit features a function that automatically
switches to the rear view camera video (
R.C
IN) when a rear view camera is installed on
your car and the shift lever is moved to the RE-
VERSE (R) position. (For more details, con-
sult your dealer.)
You can also switch the rear view image by
pressing the touch panel key.
For details refer to Using the rear view on page
13.
! After you set up the rear view camera set-
ting, move the shift lever to REVERSE (R)
and confirm that the rear view camera
video is shown on the display.
! Change this setting if the display switches
to the rear view camera video by error while
you are driving forward.
! To stop watching the rear view camera
video and return to the source display,
press and hold
MUTE.
! Touch the RearView source icon to display
the rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to Se-
lecting a source on page 11.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the sys-
tem menu.
3 Touch Camera Polarity on the system
menu to select the appropriate setting.
! Battery – When the polarity of the con-
nected lead is positive while the shift lever
is in REVERSE (R) position
En
68
Section
19 System settings