Preparation for upgrade, Checking the device number 22, Checking the current version 22 – Pioneer CNSD-350FM User Manual

Page 22: The navigation system upgrade process, 04 instructions for upgrading, Checking the device number, Checking the current version

Advertising
background image

The navigation system
upgrade process

1 Check the device number of your naviga-

tion system.
= For details of the operation, refer to

Checking the device number on this
page.

j

2 Check the version information.

= For details, refer to Checking the current

version on this page.

j

3 Get the password for authentication.

= For details, refer to Getting the password

for authentication on the next page.

j

4 Upgrade the software programme of your

navigation system.
= For details of the operation, refer to Up-

grading the software programme and the
map database on the next page.

j

5 Check whether the upgrade was done prop-

erly.
= For details, refer to Checking whether

the upgrade was done properly on page
24.

j

6 Update the Bluetooth firmware.

= For details, refer to Updating the

Bluetooth wireless technology software
on page 25.

Preparation for upgrade

Checking the device number

First, check your device number
(DEVICE NUMBER, displayed such as
Device Number or Device#) of your navigation
system for later procedures. To display the de-
vice number, do the following.

1

Park your vehicle in a safe place and

apply the handbrake.

2

Insert the upgrade SD memory card

into the SD card slot.

3

Turn the ignition switch OFF and back

ON to reboot the navigation system.
After a short pause, the device number will ap-
pear.

4

Write down your device number

(Device#) onto the supplied Media Number
Card (MEDIA NUMBER CARD) to avoid mis-
takes.

5

Touch [Cancel].

The navigation system restarts.

6

Turn off the vehicle engine to termi-

nate the system.
The navigation system is also turned off.

7

Eject the upgrade SD memory card.

Checking the current version

You may need the version information to con-
firm completion of upgrade. Check the version
information using the following procedure.

1

Press the MENU button to display the

“Top Menu”, and then touch [Settings].

2

Touch [System Settings].

The

“System Settings” menu appears.

3

Touch [Service Information] on the

“System Settings” menu.

4

Write down the version displayed in

“Map Version” and “Version”.

Engb

22

Chapter

04

Instructions for upgrading

Advertising
This manual is related to the following products: