Pioneer AVH-X7500BT - Manual (Page 4)

When connecting to separately sold power amp
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Connect with RCA cables
(sold separately)
Rear speaker
Perform these connections when
using the optional amplifier.
System remote control
Front speaker Front speaker
Left Right
Rear speaker
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Subwoofer Subwoofer
To front
output
To rear
output
To subwoofer
output
This product
Rear output
(REAR OUTPUT)
Front output
(FRONT OUTPUT)
Subwoofer output
(SUBWOOFER OUTPUT)
13 cm
17 cm
13 cm
The pin position of the ISO connector
will differ depending on the type of
vehicle. Connect 5* and 6* when Pin 5
is an antenna control type. In another
type of vehicle, never connect 5* and 6*.
Blue/white (6*)
Connect to auto-antenna

relay control terminal
(max. 300 mA 12 V DC).
Blue/white (5*)
When connecting the external video component and the display
This product
External video
component (sold
separately)
RCA cable (sold separately)
Audio inputs
(AUDIO INPUT)
Video input (VIDEO INPUT)
Display with RCA
input jacks (sold
separately)
Rear monitor output
(REAR MONITOR OUTPUT)
To video input
To video output
To audio outputs
13 cm
RCA cables (sold separately)
17 cm
! It is necessary to change AV Input in the
system menu when connecting the external
video component.
This product ’s rear video output is for connec-
tion of a display to enable passengers in the rear
seats to watch the DVD, etc.
WARNING
! Never install a rear display in a location that is
visible to the driver while the vehicle is in motion.
Connecting the units
4
Section
Connecting the units
En
01
<CRD4677-A/N>4