Pioneer AVIC-70D - Manual (Page 17)

DIN Rear-mount
Installation using the screw holes on the side of the unit
• Fastening the unit to the factory radio mounting bracket.
Select a position where the screw holes of the bracket and
the screw holes of the head unit become aligned (are fit-
ted), and tighten the screws at 2 places on each side.
Use either binding screws (5
×
6 mm) or flush surface
screws (5
×
6 mm), depending on the shape of the screw
holes in the bracket .
16
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
ENG/MASTER 96
17
Screw
Dashboard or Console
Mounting bracket
CRD3456A/001-027/UK 5/15/01 10:57 PM Page 17