Pioneer AVIC F900BT - Manual (Page 47)

You can view current traffic conditions and in-
formation. When the navigation system re-
ceives updated traffic information, it will
overlay the traffic information on your map
and also display detailed text information
when available.
In the default setting, the navigation system
takes into account traffic information and tries
to avoid traffic jam and suggests better routes.
Also, when you are travelling along a route
and the system finds another better route for
avoiding the traffic jam, the current route will
be recalculated automatically.
The term
“traffic jam” in this section indicates
the following types of traffic conditions:
— Stop-and-go traffic
— Stopped traffic
— Closed/blocked roads
Viewing the traffic list
Traffic Information is displayed on a screen in
the form of a list. This allows you to check how
many traffic incidents have occurred, their lo-
cation and their distance from your current po-
sition.
% Touch [Destination] on the “Top Menu”,
and then touch [Traffic].
A list with traffic information that has been re-
ceived is shown. The list is sorted by distance
from your current position.
Places (street names) where incidents have
occurred are displayed on the list.
1 2 3
1 Event-related icon
2 Street or location and direction
3 Distance to the location and event
Touching the desired item allows you to check
its position on the map.
How to read traffic
information on the map
The traffic event information displayed on the
map is as follows.
p Further zooming out hides the lines and
icons of traffic information.
Traffic event icon
!
with red line:
Stop-and-go traffic
! with red line:
Stopped traffic
!
with red line:
Closed/blocked roads
! etc.:
Accidents, constructions, etc.
Setting the traffic information
Preferred functions related to traffic informa-
tion can be set.
1 Touch [Destination] on the
“Top Menu”,
and then touch [Traffic].
2 Touch [Settings].
The
“TMC Control Centre” screen appears.
Using traffic information
Engb
47
Chapter
07
Using
traff
ic
information