BT ALARM CLOCK RADIO - Manual (Page 9)

BT Freestyle Alarm Clock/Radio ~ Issue 4 ~ 2nd Edition ~ 22nd July’03 ~ 5563
10
To set the alarm
Press ALARM 1 or ALARM 2, to
select the alarm you want. The
display shows
AL1 or AL2 and the
current setting, e.g.
07:30 and the
type of setting – daily, weekday or
weekend.
Press and hold the UP or DOWN
button to adjust and set the time
quickly.
Press the UP or DOWN button
repeatedly
to adjust the alarm time
minute by minute.
Press the SNOOZE button to select
daily (d), weekday (
Wd) or weekend
( WE).
Press the same button – ALARM 1
or ALARM 2 – to select the type of
alarm you want e.g.:
Alarm Beeps – Display shows
Radio alarm – Display shows
Alarm off – No icon is shown.
After a short while the clock radio
display will revert to idle mode.
1
1
Alarm 1
Alarm 2
ᮢ
ᮡ
Setting
ᮢ
ᮡ
Setting
Snooze
Radio Off
Alarm 1
Alarm 2
To switch the alarm beeps/radio off
When the alarm/radio is sounding:
Press ALARM 1 or ALARM 2 as
appropriate and the alarm
beeps/radio will stop.
To switch the alarm off permanently,
press ALARM 1 (or ALARM 2)
repeatedly
until no alarm icon is
shown on the display.
To use snooze control
When the alarm beeps/radio sound,
press the SNOOZE button.
To adjust the volume of the radio
When the alarm is on, press the +
or – button to increase or decrease
the volume.
Snooze control
The SNOOZE button lets you temporarily turn
off the alarm beeps or radio for 9 minutes. When
that time has elapsed, the radio or alarm beeps
will sound again. You can continue to use snooze
control or turn the alarm off completely using
the ALARM 1 (or ALARM 2) button.
Alarm 1
Alarm 2
Snooze
Radio Off
Vol
or
Please note
When using the radio alarm. the last station
you listened to will play when the alarm
activates.