Pioneer P1DAB-S - Manual (Page 12)

Connecting your equipments
12
En
Connecting to a digital audio device
You can connect the CD player to a digital device using a
coaxial cable (commercially available).
• The audio of iPod/iPhone/iPad mini is not output from the
COAXIAL OUT socket of the CD player.
Connecting the stereo receiver and CD player
Connect the stereo receiver and CD player using the supplied
remote control cable and RCA audio cable.
Note
• Make sure to connect the stereo receiver and the CD
player using the supplied remote control cable and RCA
audio cable.
AC power connection
After checking all the connections have been made correctly,
plug the AC power lead of this unit into the wall socket.
CAUTION
• Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
• Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power cord
when your hands are wet as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, etc., on the power cord, or pinch the cord. Never
make a knot in the cord or tie it with other cords. The
power cords should be routed such that they are not likely
to be stepped on. A damaged power cord can cause a fire
or give you an electrical shock. Check the power cord
once in a while. When you find it damaged, ask your
nearest PIONEER authorized service centre or your dealer
for a replacement.
CD player
Wall socket
(AC 220 V to 230 V, 50 Hz)
DIGITAL IN
COAXIAL
CD player
AV receiver, D/A
converter, etc.
Coaxial cable
(commercially
available)
Stereo receiver (XC-P01 for example)
CD player
Remote
control
cable
RCA audio cable