Pioneer DDJ-WeGO-G - Manual (Page 7)

7 En
English
2 Deck
3 f button
Use this to play/pause tracks.
4 CUE button
! Press:
Sets a cue point or moves the cue point.
! [SHIFT] + press:
The playing position moves to the beginning of the track.
5 SYNC (MASTER) button
! Press:
Synchronizes to the master deck’s tempo.
! [SHIFT] + press:
Sets the master deck for synchronization.
6 TEMPO slider
Adjusts the playing speed.
7 CTRL A button
! Press:
Turns key control on and off.
! [SHIFT] + press:
Turns key control, the filter and effects 1 to 3 all off at once.
8 CTRL B button
! Press:
Turns the filter on and off.
! [SHIFT] + press:
Turns key control, the filter and effects 1 to 3 all off at once.
9 FX1 button
! Press:
Turns effect 1 on and off.
! [SHIFT] + press:
Switches the effect types of FX1.
a FX2 button
! Press:
Turns effect 2 on and off.
! [SHIFT] + press:
Switches the effect types of FX2.
b FX3 button
! Press:
Turns effect 3 on and off.
! [SHIFT] + press:
Switches the effect types of FX3.
c AUTO LOOP (MOVE GRID) control
! Turn:
Changes the loop length for playback.
! Press:
Turns loop playback on and off.
! [SHIFT] + turn:
Moves the beat grid position.
* This function can be used when you upgrade to VIRTUAL DJ
PRO.
! [SHIFT] + press:
Sets the manual loop’s in and out points.
Turns manual loop playback on and off.
d DECK button
Switches the deck to be operated.
e SHIFT button
When another button is pressed while pressing the [SHIFT] button, a
different function is called out.
f SAMPLER button
! Press:
Turns the sampler mode on and off.
g HOT CUE (DELETE)/SAMPLER button
! Press:
When the sampler mode is off, sets or calls out the hot cue point.
When the sampler mode is on, plays/stops playback of the sam-
ple sound.
! [SHIFT] + press:
When the sampler mode is off, cancels the hot cue set at the
button that is pressed.
When the sampler mode is on, if a sample sound is playing, play-
back returns to the beginning of the sample sound and continues
from there.
h Jog dial
 When the JOG FX mode is off
— Scratch
When turned while touching a metallic part of the top of the
jog dial, the sound is played according to the direction and
speed at which the jog dial is turned.
— Pitch bend
The playing speed can be adjusted by turning the outer part
of the jog dial during playback.
— Manual search
When the jog dial is spun while pressing [SHIFT] button dur-
ing playback, the track is fast-forwarded/fast-reversed.
 When the JOG FX mode is on
— JOG FX control
Effect parameters can be adjusted by turning the jog dial.
3 Mixer
i MIC VOL control
Adjusts the audio level input to the [MIC] terminal.
j MASTER VOL control
Adjusts the sound level output from the master.
! The adjustment made here does not affect the [MASTER] control
on the computer's screen.
k HEADPHONES MIX control
Adjusts the balance of the monitor volume between the sound of the
deck whose [
] button is pressed and the master sound.
! The sampler sound is output regardless of the position of the
[HEADPHONES MIX] control.
l HEADPHONES VOL control
Adjusts the audio level output from the [PHONES] terminal.
! The adjustment made here does not affect the [VOL] control
(headphones volume control) on the computer's screen.
! The sound of the microphone connected to the [MIC] jack is not
output from the headphones.
m EQ (HI, MID, LOW) controls
These adjust the sound quality input to the various decks.
[HI] (treble range), [MID] (middle range), [LOW] (low range)
n CUE (Headphones cue button)
Use this to monitor the sound of the respective decks over the
headphones.
o Channel Level Indicator
Indicates the level of the sound before it passes through the channel
faders of the respective decks.
p Channel fader
Adjusts the sound level output from the various decks.
q Crossfader
Switches the sound of the decks assigned to the left and right sides
of the crossfader for output.