Pioneer MCS-FS131 - Manual (Page 30)

Connecting 30
En
C
onnec
ting
2
3. Secure the speaker and the pole with 2
screws. Ensure that the speaker wire does
not get pinched between the speaker and
the pole. The height of the speaker stands
can be adjusted in two levels; select the
height you prefer, and fix in position.
For direct installation
Use the supplied adhesive to attach 4 pads to
the base of the front speakers.
Connect the wires to the player
Insert the cables connected to the player to the
same colored connector on the speaker.
Caution
‡ Do not connect any speakers other than those
supplied to this system.
‡ Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
‡ These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.