Pioneer AVIC-F850BT - Manual (Page 8)

Connecting the system
The navigation unit
Fuse (10 A)
Wired remote input
Please refer to the
instruction manual for
the Hard-wired remote
control adapter (sold
separately).
Power cord
For connection, refer to the wiring and
installation manual separately supplied.
Yellow/black
If you use an equipment with mute
function, connect that equipment to
the Audio Mute lead. If not, keep this
lead free of any connections.
Vehicle Bus adapter input
Please refer to the instruction
manual for the Vehicle Bus
adapter (sold separately).
Aerial jack
RCA connector
13 cm
15 cm
Vehicle
aerial
(*2)
Audio source will be set to mute or attenuate, while the
following sounds will not be muted or attenuated. For details,
refer to Operation Manual.
— voice guidance of the navigation
— incoming ringtone and incoming voice of the mobile
phone that is connected to this navigation system via
Bluetooth
® wireless technology
Note
(*2)
If you use a USB
storage device, pull
out the plug and
insert a USB storage
device.
<CRD4700-A/N>8
Engb
8
Section
02 Connecting the system