Switching auto pi seek 11, Switching the auxiliary setting 11, Saving the battery consumption 11 – Pioneer DEH-110E User Manual

Page 11: Sound muting 11, Operating this unit, Switching auto pi seek, Switching the auxiliary setting, Saving the battery consumption, Sound muting

Advertising
background image

! The tuning step remains at 50 kHz during

manual tuning.

1

Press FUNCTION to select FM.

Refer to Adjusting initial settings on the pre-
vious page.

2

Press c or d to select the FM tuning

step.
Press c to select 50 (50 kHz). Press d to se-
lect

100 (100 kHz).

Switching Auto PI Seek

The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.

1

Press FUNCTION to select A-PI.

Refer to Adjusting initial settings on the pre-
vious page.

2

Press a or b to turn the Auto PI seek

on or off.

Switching the auxiliary setting

It is possible to use auxiliary device with this
unit. Activate the auxiliary setting when using
auxiliary device connected to this unit.

1

Press FUNCTION to select AUX.

Refer to Adjusting initial settings on the pre-
vious page.

2

Press a or b to turn the auxiliary set-

ting on or off.

Using the AUX source

% Insert the stereo mini plug into the
input jack on this unit.

Selecting AUX as the source

% Press SOURCE to select AUX as the
source.

Saving the battery consumption

Switching this function on enables you to save
the consumption of battery power.

! Operations other than turning on the

source are not allowed when this function
is on.

Important

If the battery in your vehicle is disconnected, the
Power Save mode is canceled. Turn on Power
Save again once the battery has been recon-
nected. If the ignition switch in your vehicle
doesn

’t have an ACC (accessory) position, it is

possible depending on the connection method
that when Power Save is off, the unit will draw
power from the battery.

1

Press FUNCTION to select SAVE.

Refer to Adjusting initial settings on the pre-
vious page.

2

Press a or b to turn the power save on

or off.

Sound muting

Sound from this unit is muted automatically in
the following cases:

! When a call is made or received using a

cellular telephone connected to this unit.

! When the voice guidance is output from a

Pioneer navigation unit connected to this
unit.

The sound is turned off,

MUTE is displayed

and no audio adjustments, except volume con-
trol, are possible. Operation returns to normal
when the phone connection or the voice gui-
dance is ended.

Operating this unit

En

11

English

Section

02

Advertising
This manual is related to the following products: