Pioneer X-SMC01BT-W - Manual (Page 4)

4
En
Switches the unit between standby and on
Press  STANDBY/ON (1).
Setting the clock
1. Press CLOCK/TIMER (8) and ENTER (4).
2. Use
k/l and ENTER (4 ) to set the day, hour and minute.
Setting the timer
1. Press CLOCK/TIMER (8).
2. Use
k/l and ENTER (4 ) to adjust the day of the week and time.
Control the display brightness
Press DIMMER (e ) to switch the display brightness in four steps.
Control sound and adjust volume
  Press EQUALIZER, P.BASS, BASS or TREBLE (9 ) to adjust sound quality.
  Press VOLUME +/– (d) to adjust the listening volume.
  Press MUTE (5) to mute the sound.
Playing iPod/iPhone/iPad or USB device using the USB terminal
1. Press USB (2) and connect your iPod/iPhone/iPad to the USB terminal.
2. Press d/ (6
) to start playback.
Listening to the audio CD
1. Press CD (2).
2. Press OPEN/CLOSE (7) to open disc door and set a disc.
3. Press d/ (6
) to start playback. Use numeric buttons (3) or o/p (6) to select the track.
4. Press REPEAT (b) or RANDOM (a ) to adjust the play mode.
Listening to the radio
1. Press TUNER (2).
2. Press TUNE +/– (c) to tune in to the desired station.
Bluetooth® audio playback (X-SMC01BT only)
1. Press BT AUDIO (2).
2. Turn on the power to the Bluetooth
capable device that you wish to pair with, and perform pairing
procedure on it.
STANDBY/ON
 
CD USB TUNER AUDIO IN
DISPLAY FOLDER
MENU
PRESET VOLUME
ST/MONO ASPM PTY DISPLAY
+
MUTE
TUNE–
TUNE+
DIMMER
   
 
–
+
–
MEMORY
/PROGRAM
1 2 3
4 5 6
7 8 9
0
BT AUDIO CLOCK/TIMER SLEEP
EQUALIZER
P.BASS
BASS/TREBLE
RANDOM CLEAR REPEAT
OPEN/CLOSE
RDS
ENTER
OPTION
8
9
10
11
13
14
1
2
3
4
5
6
12
7
l “Pairing with the unit (Initial registration)”
© 2013 PIONEER CORPORATION.
All rights reserved.
Basic control
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component,
l “Troubleshooting” . Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks l “Troubleshooting”, ask your nearest Pioneer authorized service center or your
dealer to carry out repair work.
• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to
return to normal operating conditions.
• Amplifier section
RMS Power Output: . . . . . . . . . . . . . 10 W + 10 W
(1 kHz, 10 %, T .H .D ., 8 Ω)
• Tuner section
Frequency Range (FM) . . . .87 .5 MHz to 108 MHz
Antenna Input (FM) . . . . . . . . . . 75 Ω unbalanced
• Bluetooth (X-SMC01BT only)
Version
. . . . . . . . . Bluetooth Specification Ver . 2 .1 + EDR
Output . . . . . . . . . Bluetooth Specification Class 2
Specifications
Estimated line-of-sight transmission distance*
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About 10 m
Frequency range . . . . . . . . . . . . . . . . . . . . 2 .4 GHz
Modulation . . . . . . . . . . . . . . . . . . . . . . . . . . FH-SS
(Frequency Hopping Spread Spectrum)
Supported Bluetooth profiles . . . . . A2DP, AVRCP
Supported Codec . . . . . . . .SBC (Subband Codec)
Supported contents protection . . . . . . . . SCMS-T
* The line-of-sight transmission distance is
an estimate . Actual transmission distances
supported may differ depending on
surrounding conditions .
• Miscellaneous
USB terminal . . . . . . . . . . . . . . . . . . . . . . 5 V, 2 .1 A
Power source . . . . AC 100 V to 240 V, 50 Hz/60 Hz
Power consumption
Power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 W
Power stand-by . . . . . . . . . . . . . . . . . 0 .5 W or less
Power stand-by (BT STANDBY ON)*
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 .5 W or less
*X-SMC01BT only
Dimensions
. . . . . . . 430 mm (W) x 218 mm (H) x 114 mm (D)
Weight (without package) . . . . . . . . . . . . . . .2 .8 kg