Pioneer AVD-W7900 - Manual (Page 6)

For viewing LCD comfortably
Due to its construction, the viewing angle of
the LCD screen is limited. You can adjust it by
changing either screen size or picture adjust-
ment.
Changing the wide screen size
By changing the screen size from 4:3 to 16:9,
you can adjust the screen so that the screen
can fit to the video image you are playing.
For details concerning operation, refer to
Changing the wide screen mode on page 8.
Changing the picture adjustment
You can make the best adjustment to the pic-
ture display by changing
BRIGHTNESS,
CONTRAST, COLOR and HUE. You can also
dim or enlight the overall picture image using
DIMMER.
For details concerning operation, refer to
Changing the picture adjustment on page 9.
Installing and removing
the display unit
The mounting arm described below is sold se-
parately. For more information on the installa-
tion, refer to the mounting kit owner
’s manual
or consult your nearest dealer.
Important
! To prevent failure, be sure to turn the ignition
switch or system power OFF before installing
or removing the display unit. Also take care
not to grip the screen or buttons too firmly
and not to drop the display unit.
! Do not let any water get on the terminals on
the display unit or on the cable and do not
allow the terminals to be shorted by a metal
object or the like. This can cause system
breakdown.
! Be careful not to touch terminals on the dis-
play unit or on the cable. Doing so may cause
connection failures. If any terminals are dirty,
wipe them with a clean dry cloth.
Installing the display unit
1 Align the bracket into the grooves of
the base.
Mounting arm
(sold separately)
Bracket
Base
2 Slide the display unit until it clicks into
place.
Before You Start
En
6
Section
02