Stb (catv) operations, Stb (satellite tuner) operations – Pioneer VSA-E08 User Manual

Page 62

Advertising
background image

62

En

Remote Control of Other Components

STB (CATV) operations

The following operations are available from the amplifier's remote control after you program

your CATV into it, but some operations may need to be learned separately by the amplifier (see
“Setting Up the Remote Control to Control Other Components,“ p.52-55).

• To perform these operations, press the TV CONTROL button to set the remote to the CATV opera-

tion mode.

• For more information on individual commands consult the manual that came with the your CATV.

1 MUTE

Press to mute or restore the volume.

2 PAGE (–/+)

Use to displays other pages of on-screen
information if there is too fit one screen.

3 MENU

Use to display the main menu.

4 GUIDE

Use to display the Program Guide screen.

5 Number buttons

Use to select a specific TV channel.

6 L1-4

Freely assignable keys where you can enter any
command you like-refer to p.54-55 for more on
this.

7 CH ENTER

Use to select the channel specified with the
number buttons (not all models require this step).

memo

STB (CATV)

1

2

4

7

8

9

5

6

3

CH

ENTER

GUIDE

MUTE

MENU

0

PAGE

PAGE

L1

L2

L3

L4

7

6

5

1

2

4
3

STB (satellite tuner) operations

The following operations are available from the amplifier's remote control after you program

your satellite tuner into it, but some operations may need to be learned separately by the
amplifier (see “Setting Up the Remote Control to Control Other Components,“ p.52-55).

• To perform these operations, press the TV/SAT button to set the remote to the SAT operation mode.
• For more information on individual commands consult the manual that came with the component.

memo

STB (SAT)

1

2

4

7

8

9

5

6

3

EXIT

D

E

0

L1

A

B

C

L2

GUIDE

MENU

2

4

7

1

3

6

5

1

Press to switch the digital tuner on or off (not
possible with all models, especially those without
a standby mode).

2 A/B/C/D/E

Use to make selections from the SAT menu.

3 MENU

Use to turn the main menu on or off.

4 GUIDE

Use to turn the program information screen on or
off.

5 Number buttons

Use to select satellite channels.

6 L1-2

Freely assignable keys where you can enter any
command you like-refer to p.54-55 for more on
this.

7 EXIT

Press to exit the current setting of the SAT.

Advertising