Best Data Products DSL542EU - Manual (Page 23)

DSL542EU ADSL Router User’s Manual
17
Ethernet Ports Mapping feature allow you map each PVC to four/eight Ethernet ports. You
can assign more than one PVC to one Ethernet port (LAN port), or more than one Ethernet
port (LAN port) to single PVC. But only Ethernet port 1 (LAN 1) can configure the Router if
other Ethernet ports (LAN ports) don’t exist the same Bridge group. Routing mode has
highest priority on port mapping. If the port is assigned for routing mode protocol, you cannot
assign it to other PVCs. After unchecking the routing mode entry, the port will become
assignable.
Please note that every time you add a new PVC or change the PVC/Port Mapping and click
Apply button, switch will reset its settings. That may be a pause between your Network
Interface Card and Router. Sometimes the web page cannot get the response, and return
page not found. If so, click WAN link which locates at left menu after clicking the Apply button
two or three seconds.
DNS Server, SNTP, DHCP Server, Routing Table, Virtual Server, IP Filter, Port Filter and IDS
functions can only be applied to routing protocol ports.
WAN configuration page shows four or eight Ethernet ports (depending on your model)
available for multiple using.