Pioneer X-SMC01BT-S - Manual (Page 8)

Part names and functions 02
8
En
11 Tuner control buttons
ST/MONO
Use to switch the sound mode between stereo and
monaural. (page 23)
RDS ASPM
Use to search for RDS Auto station program memory
(page 24).
RDS PTY
Use to search for RDS program types (page 24).
RDS DISPLAY
Press to change the RDS display for information mode
(page 24).
12 OPEN/CLOSE
Use to open or close the electric slide CD door (page 17).
13 Sound control buttons
Adjust the sound quality (page 13).
14 RANDOM
Randomize order of track playback from a CD, iPod or USB
(page 18).
15 REPEAT
Press to change the repeat play setting from a CD, iPod or
USB (page 18).
16 Volume control buttons
Use to set the listening volume (page 12).
17 DIMMER
Dims or brightens the display. The brightness can be
controlled in four steps (page 12).
Hang from the wall to use
When hanging the unit from a wall, firmly screw the wall
hanging screws (sold separately) into the wall, and confirm
that the wall is capable of holding the unit safely. If the
materials or strength of the wall cannot support the weight of
the unit, then there is the possibility of the unit falling off.
1 Screw the wall hanging screws into the
wall, putting them the specified attachment
measurement (130 mm) apart.
2 Insert the wall hanging screws into the lock
holes.
3 Slide to the left to secure in place. (Slide
distance is around 10 mm)
Note
• When attaching the unit to the wall, there is the
possibility of it falling depending on how it is attached.
Take due care to avoid any accidents.
• Select a location for the placement/installation of unit
that is sufficiently strong enough to hold the weight of
the unit. If you do not know the strength etc. of the wall,
then consult with a professional.
• The company bears no responsibility for accidents or
damages caused by inadequate installation/attachment,
incorrect use, modifications, natural disasters etc.
• Place all cables along the wall to prevent anyone from
tripping over them.
• Do not exchange the changeable panel while the unit is
hanging from a wall.
ANTENNA DC IN
Lock holes
Wall hanging screws
(commercially available)
6 mm to 7 mm
2 mm to 3 mm
150 mm 130 mm 150 mm
Attachment measurement for
wall hanging screws
Suggested screw
diameter
(Please use screws that
match the wall strength
and wall materials)
Screw head
ø
9 mm to
ø
12 mm
Screw diameter
ø
4 mm
AUDIO IN
POWER ON TIMER