Pioneer AVIC-F920BT - Manual (Page 121)

p This function is available for AVIC-F20BT
only.
The term
“external unit” refers to future
Pioneer devices that are not currently planned
for, or to devices that allow control of basic
functions although they are not fully con-
trolled by the navigation system. Two external
units can be controlled by this navigation sys-
tem. When two external units are connected,
the navigation system allocates them as exter-
nal unit 1 or external unit 2.
For details of the connection method, refer to
Installation Manual.
For details of the operation, refer to the exter-
nal unit
’s operation manual. This section pro-
vides information on external unit operations
with the navigation system that differ from
those described in the external unit
’s opera-
tion manual.
p Operation varies depending on the external
unit connected. (In some cases, the exter-
nal unit may not respond.)
Starting procedure
1 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 67.
2 Tap [EXT1] or [EXT2] on the left edge of
the screen to select the external unit.
3 Use the touch panel keys on the screen
to control the external unit.
= For details, refer to Using the touch panel
keys on the next page.
Reading the screen
1
3 2 4 5
6
1 Source icon
Shows which source has been selected.
2 External unit indicator
Displays the information that is sent by con-
nected external units.
3 NEWS indicator
Shows the status of news programmes.
4 TRFC indicator
Shows the status of traffic announcements.
5 Current time
6 Auto/Manual mode indicator
Shows the current mode.
Engb
121
Chapter
26
Using
the
exter
nal
unit
(EXT1
,
EXT2
)
Using the external unit (EXT1, EXT2)