Pioneer BDP-440 User Manual
Page 40
07
40
En
Audi
o O
u
t
Digital Output
Bitstream
Select this to output digital audio signals directly.
PCM
Select this to output digital audio signals converted to PCM audio signals.
Re-encode
Select this to output digital audio signals converted to DTS Digital Surround.
Off
Select this to output audio signals other than digital audio signals.
Downsampling
48k
Select this when playing a disc recorded with a sampling frequency of 48 kHz.
96k
Select this when playing a disc recorded with a sampling frequency of 96 kHz.
192k
Select this when playing a disc recorded with a sampling frequency of 192
kHz.
DRC (Dynamic Range
Control)
* Only Dolby digital and
analog audio signals are
supported.
Off
Select this to output audio signals without using the DRC function.
On
Select this to adjust the range between the loudest and softest sounds
(dynamic range) for playback at average volume. Use this when it is hard to
hear dialog or when watching movies at midnight.
Auto
Select to switch the DRC setting On/Off automatically according to the input
audio signal from the disc.
HDM
I
Color Space
RGB
Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
YCbCr
Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr 422
Select this to output the video signals as YCbCr 4:2:2 signals.
Full RGB
Select this to output the video signals as RGB signals. Choose this if the
colors seem too dense and all the dark colors are displayed in a uniform
black.
Resolution
Auto
Select this to choose the resolution of the video signals output from the
HDMI OUT terminal automatically.
480I/576I
Output the video signals from the
HDMI OUT terminal with the selected
resolution.
The resolution can be changed by pressing
HDMI, but Auto cannot be
selected.
480P/576P
720P
1080I
1080P
HDMI Audio Out
Bitstream
Select this to output HDMI audio signals directly.
PCM
Select this to output HDMI audio signals converted to 2-channel audio
signals.
Re-encode
Select this to choose the type of audio signals automatically.
Off
Select this when you do not want to output the audio signal from the HDMI
output terminal.
Control
On
Select this to control the player with the remote control of the connected AV
device using an HDMI cable. Also refer to page 16.
Off
Select this when you do not want to control the player with the remote control
of the connected AV device using an HDMI cable.
To use PQLS (BDP-440), Sound Retriever Link and Stream Smoother Link (page 16), Control must be set to
On.
HDMI Deep color
30bits
Select this when outputting the video signals with 30-bit color.
36bits
Select this when outputting the video signals with 36-bit color.
Off
Select this when outputting the video signals with normal 24-bit color.
HDMI 1080P 24Hz
On
Select this when Resolution is set to
Auto or 1080P and outputting 1080p/24
video signals to a TV compatible with 1080p/24.
Off
Select this when Resolution is set to 1080P and outputting 1080p/60 video
signals to a TV compatible with 1080p/60.
HDMI 3D
Auto
With 3D discs, the disc is played with 3D images.
Off
Even with 3D discs, the disc is played with 2D images.
3D notice
Yes
This sets whether or not to display the 3D notice when playing 3D images.
No
Setting
Options
Explanation
BDP-140_VXCN5_IBD_EN.book Page 40 Thursday, July 7, 2011 2:29 PM