Pioneer SC-LX82 - Manual (Page 3)

3
About the Advanced MCACC Application (Continued)
Things you can accomplish with this application
1. Advanced EQ Setup, which you can do with the receiver (see page 113 of the receiver’s Operating
Instructions), allows you to choose the optimum time period for auto EQ setup. You can use this
application’s reverberation characteristics (Reverb) as a guide in choosing the best time period for
your room.
For details, see
Deciding the time period for Advanced EQ Setup calibration (page 19) .
2. Skewed reverb frequency characteristics in your listening room can prevent you from enjoying an
accurate sound field. The graphs displayed by this application are a powerful tool because they
allow you to check these reverb frequency characteristics at a glance. You can also check the
effectiveness of steps that you take to improve the acoustics of your listening room, for example,
installing sound absorbent material.
For details, see
Checking steps to improve your room’s reverb characteristics (page 21) .
3. The reverb characteristics after calibration can be displayed. This lets you to check the EQ effects of
the Advanced MCACC measurements you have made.
For details, see
About the display of the reverb characteristics graphs before and after calibration
(page 23) .
4. The Group Delay graphs allow you to check the group delay characteristics before and after
calibration.
For details, see
Reading the group delay characteristics graph (Group Delay) (page 25) .
5. The MCACC parameter display (Parameters) allows you to display on the computer all the
parameters (measurement values) stored in the receiver’s MCACC memories.
For details, see
Display of the MCACC parameters (page 26) .