Power cord, Power amp (sold separately), Connections – Pioneer DEH-4600BT User Manual

Page 4

Advertising
background image

Black plate (4,1)

Hard-wired remote control adapter can be
connected (sold separately).

Power cord

1

3

3

2

4

4

5

5

6

6

b

8

9

7

a

d

c

1 To power cord input
2 Depending on the kind of vehicle, the func-

tion of

3 and 5 may be different. In this

case, be sure to connect

4 to 5 and 6 to

3.

3 Yellow

Back-up (or accessory)

4 Yellow

Connect to the constant 12 V supply termi-
nal.

5 Red

Accessory (or back-up)

6 Red

Connect to terminal controlled by ignition
switch (12 V DC).

7 Connect leads of the same color to each

other.

8 Black (chassis ground)

9 Blue/white

The pin position of the ISO connector will dif-
fer depending on the type of vehicle. Connect
9 and b when Pin 5 is an antenna control
type. In another type of vehicle, never con-
nect

9 and b.

a Blue/white

Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).

b Blue/white

Connect to auto-antenna relay control termi-
nal (max. 300 mA 12 V DC).

c Speaker leads

White: Front left

+

White/black: Front left

*

Gray: Front right

+

Gray/black: Front right

*

Green: Rear left

+ or subwoofer +

Green/black: Rear left

* or subwoofer *

Violet: Rear right

+ or subwoofer +

Violet/black: Rear right

* or subwoofer *

d ISO connector

In some vehicles, the ISO connector may be
divided into two. In this case, be sure to con-
nect to both connectors.

Notes

! Change the initial setting of this unit (refer to

the operation manual). The subwoofer output
of this unit is monaural.

! When using a subwoofer of 70 W (2 W), be

sure to connect the subwoofer to the violet
and violet/black leads of this unit. Do not
connect anything to the green and green/
black leads.

Power amp (sold separately)

Perform these connections when using the op-
tional amplifier.

DEH-X5600BT

1

1

3

2

4

5

5

3

2

6

7

7

DEH-4600BT

1

3

2

6

7

7

1 System remote control

Connect to Blue/white cable.

2 Power amp (sold separately)
3 Connect with RCA cables (sold separately)
4 To Front output
5 Front speaker
6 To Rear output or subwoofer output
7 Rear speaker or subwoofer

Connections

4

Section

Connections

En

02

<QRD3194-A>4

Advertising
This manual is related to the following products: