Zone 2 subwoofer zone 2 out, Single) zone 2 out surround back r l, Zone 3 out – Pioneer SC-2023-S User Manual
Page 32
32
03
Connecting your equipment
Basic MULTI-ZONE setup (ZONE 2)
1 Connect a separate amplifier to the AUDIO ZONE 2 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
2 Connect a subwoofer to the SUBWOOFER ZONE 2 OUT jack on this receiver.
When a subwoofer is connected, we recommend setting HPF (High Pass Filter) at ZONE Setup to ON (
page 93
).
3 Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver.
ZONE 2
SUBWOOFER
ZONE 2
OUT
ZONE 2
SUBWOOFER
ZONE 2
OUT
R
L
AUDIO IN
LINE LEVEL
INPUT
VIDEO IN
Sub zone (ZONE 2)
Main zone
3
2
1
MULTI-ZONE setup using speaker terminals (ZONE 2)
You must select ZONE 2 in
Speaker system setting
(
page 88
) to use this setup.
1 Connect a pair of speakers to the surround back speaker terminals.
You should have a pair of speakers attached to the surround back speaker terminals as shown below.
2 Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver.
R
Sub zone (ZONE 2)
Main zone
VIDEO IN
L
(Single)
ZONE 2
OUT
SURROUND BACK
R
L
(Single)
ZONE 2
OUT
SURROUND BACK
R
L
2
1
Secondary MULTI-ZONE setup (ZONE 3)
% Connect a separate amplifier to the AUDIO ZONE 3 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
ZONE 3
OUT
ZONE 3
OUT
R
L
AUDIO IN
Sub zone (ZONE 3)
Main zone