When connecting with a rear view camera, Connecting the units, Caution – Pioneer AVH-P5000DVD User Manual
Page 10
When connecting with a rear view camera
When this product is used with a rear view camera, it is possible to automatically switch
from the video to rear view image when the gear shift is moved to REVERSE (R).
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
•
The screen image may appear reversed.
•
The rear view camera function is to be used as an aid for backing into a tight parking spot. Do not use this
function for entertainment purposes.
•
Objects in the rear view may appear closer or more distant than they actually are.
9
Connecting the Units
Violet/white
Of the two lead wires connected to the back lamp, connect the
one in which the voltage changes when the gear shift is in the
REVERSE (R) position. This connection enables the unit to
sense whether the car is moving forwards or backwards.
This product
Rear view camera input
(REAR VIEW
CAMERA IN)
You must use a camera
which outputs mirror
reversed images.
20 cm
Fuse resistor
Connection method
1. Clamp the lead.
2. Clamp firmly with
needle-nosed pliers.
Note:
• It is necessary to set CAMERA POLARITY properly in SYSTEM MENU when
connecting the rear view camera.
15 cm
RCA cable
(sold separately)
To video output
CAUTION
Rear view camera