Pioneer RS-A9 - Manual (Page 28)

27
Audio Adjustment <Equalizer>
Setting the equalizer curve
• You can switch between the Left/Right combine mode and Left/Right independent mode
at any time. So even when using the Left/Right independent mode, you can switch to the
Left/Right combine mode to perform adjustments.
Note:
• Even when using the Left/Right combine mode you can switch to display left and right channels,
but adjustments are those performed in the Left/Right combine mode.
Note:
• You cannot set the intervals of the adjacent 2 bands to less than 1/3 of an octave.
7. Press the
5/∞ buttons and
adjust the level.
6. Press the
2/3 buttons and select
the desired frequency to be
adjusted.
5. Press the FUNCTION button 3
and select the desired band to be
adjusted.
Each press the FUNCTION button 3
switches to next band.
4. Press the FUNCTION button 1 and select left or right channel. (Only for
L/R mode.)
Each press the FUNCTION button 1 switches left and right channel.
3. Press the FUNCTION button 1 for two seconds and switch between
Left/Right independent mode (L/R) and Left/Right combine mode (COM).
2. Press the FUNCTION button 5 to select the 3-band Parametric Equalizer
Mode.
1. Open the cover of the remote control in the Equalizer Menu
(refer to page 4).
This switches to Equalizer Menu Setting Screen.