Pioneer KRL-46V - Manual (Page 14)

installation precautions
Observe the following precautions when installing with
any items such as the optional stand.
When using other stands, brackets or equivalent
items
Consult your dealer.
The following mounting holes can be used for the
installation.
rear view
note
The mounting holes can be used after removing the
black seals and the screws.
Caution
Use M6 screws, which go 12 mm to 15 mm in
depth from the mounting surface of the flat screen
TV. See the side view shown to the right.
Be careful not to block the ventilation opening at the
rear of the flat screen TV.
Be sure to install the flat screen TV on a flat surface
because the LCD panel used in this product is made
of glass.
The screw holes other than the illustrations above
are to be used only for the specified products. Never
use them for mounting non-specified products.
note
Pioneer shall not be liable for any personal injury
or product damage that results from the use of
mounting items.
•
•
•
•
•
•
•
•
preparation
Side view
Flat
screen
tV
mounting surface
mounting bracket
(or equivalent item)
m6 screw
12 mm to 15 mm
Mounting
holes
Mounting
holes

KRL46V_GB.indd 12 2008/07/09 14:08:40