Pioneer BCS-HF818 - Manual (Page 16)

2 Connecting
Connecting 16
C
onnecting
2
Assemble the speakers
Speaker Setup
Preparing the speakers
For subwoofer:
Use the supplied adhesive to attach four large pads
to the base of subwoofer.
Large non-skid pads
For front speakers:
Assembling the speaker stands and securing your
front speakers.
For horizontal installation
1. Pass the speaker cord through the hole in the
base.
2. Align the rotation stop lug with the hole in the
base.
Rotation stop
lug
3. Fasten the speaker to the base use the
horizontal mounting screw from the back side
of the base.
Horizontal mount
screw
4. Set the speaker so that the speaker cord passes
through the groove in the base.
Wire cutout
For vertical installation
1. Align the vertical mounting stay with the hole
in the base.
2. Fasten the vertical mount stay to the base using
the vertical mount bolt and hex nut. Be sure the
hex nut fits into the hexagonal groove in the
bottom of the base.
Vertical mount screw Vertical mount
hex nut
HB516-RD3_BDEUPPK_ENG.indd 16 2011-06-08 �� 7:38:12