Pioneer CDJ-2000-W - Manual (Page 19)

19 En
Connecting
the
CDJ-2000nexus
and
another
mixer
Checking the connections
 Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.
LINK NG LINK OK
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the
connection procedure.
! Set the second DJ player on in the same way.
 Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.
— To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button.
— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.
— To use a mobile device (iOS/Android) or USB device connected by wire to the USB "A terminal": Press the [USB] button.
— To use an SD memory card: Press the [SD] button.
! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed.
2 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACK TAG TRACK
/ REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button.
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
The devices that have been recognized are indicated on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.