Pioneer VSX-AX2AS-s - Manual (Page 22)

Controls and displays 04
22
En
9 MCACC indicator
Lights when one of the MCACC presets (page 29) is
selected.
10 i.LINK indicator (VSX-AX4ASi only)
Lights when an i.LINK-Audio-equipped component is
selected (page 51).
DIGITAL VIDEO SCALER indicator (VSX-AX2AS only)
Lights when Resolution is set to a setting other than
PURE (for example, when the video input signal is
upscaled) (page 66).
11 Listening mode buttons
HOME THX – Press to select a Home THX listening
mode (page 28).
STANDARD SURROUND – Press for Standard
decoding and to switch between the various 2 Pro
Logic IIx and Neo:6 options (page 27).
ADVANCED SURROUND – Use to switch between
the various surround modes (page 28).
12 MASTER VOLUME dial
13 Front panel controls
To access the front panel controls, push gently on the
lower third portion of the panel with your finger.
14 SPEAKERS
Use to change the speaker system (page 55).
15 AV PARAMETER
Use to access the AV options (page 66).
16 TUNER EDIT
Use with / to memorize and name stations for recall
(page 32).
17 BAND
Switches between AM and FM radio bands (page 32).
18 MULTI ROOM & SOURCE / REC SEL controls
If you’ve made multi-room connections (see Multi-room
listening on page 57) use these controls to control the
sub room from the main room (see Using the multi-room
controls on page 58).
You will also need to use the REC SEL controls when
recording a source (see Making an audio or a video
recording on page 67).
19 VIDEO SELECT
Press repeatedly to select the video source (page 68).
20 SIGNAL SELECT
Use to select an input signal (page 30).
21 SBch PROCESSING
Selects the surround back channel mode (page 30) or
virtual surround back mode (page 30).
22 STEREO
Switches to stereo playback (page 29).
23 PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.
24 SETUP
Press to access the System Setup menu (see page 35).
25 (TUNE/ST +/–) / ENTER
Use the arrow buttons when setting up your surround
sound system (see page 35). Use the
TUNE +/– buttons
to find radio frequencies and use ST +/– to find preset
stations (page 32).
26 RETURN
Press to confirm and exit the current menu screen.
27 MCACC SETUP MIC jack
Use to connect the supplied microphone.
28 VIDEO/GAME 2 INPUT
See Connecting a component to the front panel inputs on
page 16.
Operating range of remote control unit
The remote control may not work properly if:
• There are obstacles between the remote control and
the receiver's remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver is located near a device that is emitting
infrared rays.
• The receiver is operated simultaneously with another
infrared remote control unit.
ST AN DB Y/O N
STA ND BY /O N
AU DIO /VID EO M ULT I-C HA NN EL R EC EIV ER
30
30
7m
VSX_AX4ASi.book.fm 22 ページ ２００６年４月１１日 火曜日 午後４時１９分