Pioneer VSX-922-S - Manual (Page 6)

6
Basic playback
Multichannel playback
RECEIVER
D.ACCESS
CH LEVEL
LISTENING MODE
DIMMER SLEEP
SIGNAL SEL
SPEAKERS
MCACC
MPX
PRESET TUNE
PQLS
BAND
PHASE
AUTO
FEATURES
S.RTRV
PTY
iPod CTRL
HOME MENU
TOOLS
MENU
CH
TV CONTROL
INPUT
INPUT SELECT
iPod
USB CBL OPTION
STATUS
SAT TUNER
ZONE 2
ADPT CD TV
RCU SETUP
SOURCE RECEIVER ALL ZONE STBY
DISCRETE ON
BDR
BD DVD DVR
NET
HDMI
RECEIVER
MUTE
VOLUME
VOL
TOP MENU
VIDEO
PARAMETER
AUDIO
PARAMETER
ENTER
RETURN
STANDARD AUTO/ALC/ DIRECT ADV SURR
+Favorite
CLASS
ENTER
DISP
AUDIO
5 4 6
8
Z2
0
7 9
1 3
/ CLR
CH
CH
222
2
3
5
1
Switch on the playback component.
E.g.) Turn the Blu-ray Disc player connected to the HDMI
BD IN terminal on.
2
Switch the input of the receiver.
E.g.) Press BD to select the BD input.
3
Press AUTO/ALC/DIRECT to select ’AUTO
SURROUND’.
Also press STANDARD or ADV SURR for multichannel
playback. Select your preferred listening mode.
4
Start the playback component’s playback.
E.g.) Start playback of the Blu-ray Disc player.
5
Use VOLUME +/– to adjust the volume level.
Sound can be switched off by pressing MUTE button.
Note
• Switch to one of the underlined devices to use the remote
control to operate that device. To operate the receiver,
first press
RECEIVER , then press the appropriate button to
operate.
• The receiver’s remote control can be used to operate
not only the receiver but also a variety of other devices,
including an iPod/USB device, a Blu-ray Disc player, a TV,
etc.
Ex.: Playing a Blu-ray Disc player
BD →
• It will take about 1 minute to be able to use the NETWORK
(internet radio and such), iPod/USB, or ADAPTER PORT
from the time the power is turned on.
Listening to the radio
1
Press TUNER to select the tuner.
If necessary, press BAND to change the band (FM or AM).
2
Press TUNE +/– to tune to a station.
• Press and hold TUNE +/– for about a second. The receiver
will start searching for the next station.
• If you’re listening to an FM station but the reception is
weak, press MPX to select FM MONO and set the receiver
to the mono reception mode.
Saving station presets
If you often listen to a particular radio station, it’s convenient to
have the receiver store the frequency for easy recall whenever
you want to listen to that station.
1
Press TOOLS while receiving a signal from the
station you want to store.
The preset number is blinking.
2
Press PRESET +/– to select the station preset
you want, then press ENTER.
The preset number stop blinking and the receiver stores
the station.
Listening to station presets
You will need to have some presets stored to do this.
 Press PRESET +/– to select the station preset
you want.