Pioneer GM-6200F - Manual (Page 9)

ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
кмллдав
8
Connecting the Speaker Output
Terminals
1. Expose the end of the speaker wires
using nippers or a cutter by about
10 mm and twist.
2. Attach lugs to speaker wire ends.
Lugs not supplied.
• Use pliers, etc., to crimp lugs to wires.
3. Connect the speaker wires to the
speaker output terminals.
• Fix the speaker wires securely with the termi-
nal screws.
10 mm
Twist
Speaker wire
Lug
Speaker
output
terminal
Terminal screw
Speaker wire
Using the Speaker Input
Connect the car stereo speaker output wires to the amplifier using the supplied speaker input
connector.
• Do not connect both the RCA input and the speaker input at the same time.
7 Connections when using the speaker input
Speaker output
Car Stereo
Speaker input connector
To speaker input termi-
nal of this unit.
Green/black: CH B, Left ≠
White/black: CH A, Left ≠
White: CH A, Left +
Gray/black: CH A, Right ≠
Violet/black: CH B, Right ≠
Violet: CH B, Right +
Gray: CH A, Right +
Green: CH B, Left +