Pioneer SC-LX56-S - Manual (Page 22)

22
03
Connecting your equipment
Installing your speaker system
At the very least, front left and right speakers only are necessary. Note that your main surround speakers should
always be connected as a pair, but you can connect just one surround back speaker if you like (it must be con-
nected to the left surround back terminal).
[A] 9.2 channel surround system (Front height/Front wide) connection
! If necessary, select ‘9.1ch FH/FW’ from the Speaker System menu.
See
Speaker system setting on page 90 to do this.
! When only connecting one surround back speaker, connect it to the SURROUND BACK L (Single) terminals.
(Single)
SPEAKERS
FRONT CENTER A A
R L
SURROUND
R L
SURROUND BACK
R L
FRONT HEIGHT FRONT WIDE / B
R L R L
SUBWOOFER 1 2 SURROUND SURR BACK F HEIGHT
(Single)
FRONT
CENTER PRE OUT
F WIDE
L
R
LINE LEVEL
INPUT
LINE LEVEL
INPUT
Front height left Front height right Front wide left Front wide right
Front left Front right Center Subwoofer 2 Subwoofer 1
Surround left
Surround back right Surround back left
Surround right
[B] 7.2 channel surround system & Speaker B connection
! Select ‘7.1ch + Speaker B’ from the Speaker System menu.
See
Speaker system setting on page 90 to do this.
! When only connecting one surround back speaker, connect it to the SURROUND BACK L (Single) terminals.
(Single)
SPEAKERS
FRONT CENTER A A
R L
SURROUND
R L
SURROUND BACK
R L
FRONT HEIGHT FRONT WIDE / B
R L R L
SUBWOOFER 1 2 SURROUND SURR BACK F HEIGHT
(Single)
FRONT
CENTER PRE OUT
F WIDE
L
R
LINE LEVEL
INPUT
LINE LEVEL
INPUT
Front height left Front height right Speaker B- left Speaker B- right
Front left Front right Center Subwoofer 2 Subwoofer 1
Surround left Surround back right Surround back left Surround right