Pioneer X-DS301-K - Manual (Page 16)

16
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. Check the points below
when your X-DS301-K does not operate properly. The problem sometimes may lie in electrical
components, please also check the components and appliances being used. Contact your
nearest Pioneer authorized service if the problem still exists.
If this happens: Try this:
No audio stream or music intermittency. • Check power supply to make sure it’s
correctly connected to the outlet.
• Check 3.5 mm AUX IN cable to make sure
it’s correctly connected.
• Check iPod/iPhone connection to make
sure it’s correctly docked.
• Check sources to make sure your audio
input is switched to correct source.
The power does not turn on. Use the AC adapter and connect the device
to the power plug on the wall.
Can’t operate the remote control. Replace the batteries.
The clock is not set to the correct time. • Replace the batteries.
• Reset the clock.
Specifications
• Amplifier section
RMS power output: 2.5 W + 2.5 W (1 kHz, 15 % T.H.D, 4 Ω)
• Tuner section
Frequency range (FM): 87.5 MHz to 108.0 MHz
• Speaker section
Transducer: 36 mm Full Range Driver (Impedance: 4 Ω)
• Miscellaneous
Power requirements: AC 100 V to 240 V, 50 Hz/60 Hz, DC 5 V/2 A
Power consumption: 10 W
In standby: 0.65 W
Dimensions (W) × (H) × (D): 243 mm × 46 mm × 150 mm
Weight: 660 g
Specifications and the design are subject to possible modifications without notice, due to
improvements.
Additional Information Additional Information