Using the display correctly, Additional information, Handling the display – Pioneer AVX-7600 User Manual

Page 16: Liquid crystal display (lcd) screen

Advertising
background image

Using the display correctly

CAUTION

! If liquid or foreign matter should get inside

this unit, turn off the power immediately and
consult your dealer or the nearest authorized
PIONEER Service Station. Do not use the unit
in this condition because doing so may result
in a fire, electric shock, or other failure.

! If you notice smoke, a strange noise or smell,

or any other abnormal signs from the display,
turn off the power immediately and consult
your dealer or the nearest authorized PIO-
NEER Service Station. Using this unit in this
condition may result in permanent damage to
the system.

! Do not disassemble or modify this unit, as

there are high-voltage components inside
which may cause an electric shock. Be sure
to consult your dealer or the nearest author-
ized PIONEER Service Station for internal in-
spection, adjustments or repairs.

Handling the display

! When the display is subjected to direct sun-

light for a long period of time, it will be-

come very hot resulting in possible

damage to the LCD screen. When not

using this unit, close the display and avoid

exposing it to direct sunlight.

! The display should be used within the tem-

perature ranges shown below.

Operating temperature range: 10 to +50

°C

Storage temperature range: 20 to +80 °C

At temperatures higher or lower than the

operating temperature range the display

may not operate normally.

! The LCD screen of this unit is exposed in

order to increase its visibility within the ve-

hicle. Please do not press strongly on it as

this may damage it.

! Do not place anything on the display when

it is opened. Also, do not attempt to carry

out angle adjustment, or open/close the

display by hand. Applying strong force to

the display may damage it.

! Do not push the LCD screen with much

force as this may scratch it.

! Be careful not to place anything between

the display and the main body when the

display is opening or closing. If an object

gets between the display and main body,

the display may stop working.

! Be careful of fingers, long hair, and loose

articles of clothing which could possibly

get caught between the display and the

main body and cause serious injury.

Liquid crystal display (LCD) screen

! If the display is near the vent of an air con-

ditioner when it is opened, make sure that

air from the air conditioner is not blowing

on it. Heat from the heater may damage

the LCD screen, and cool air from the cool-

er may cause moisture to form inside the

display resulting in possible damage. Also,

if the display is cooled down by the cooler,

the screen may become dark, or the life

span of the small fluorescent tube used in-

side the display may be shortened.

! Small black dots or white dots (bright dots)

may appear on the LCD screen. These are

due to the characteristics of the LCD

screen and do not indicate a problem with

the display.

! At low temperatures, the LCD screen may

be dark for a while after the power is turned

on.

! The LCD screen will be difficult to see if it is

exposed to direct sunlight.

! When using a portable phone, keep the an-

tenna of the portable phone away from the

display to prevent disruption of the video by

the appearance of spots, colored stripes,

etc.

Additional Information

En

16

Appendix

Advertising