Pioneer AVIC-F160 - Manual (Page 43)

Black plate (43,1)
5 Touch next to the vehicle profile that
you want to modify.
6 Scroll the list and touch any of the lines
to change the parameters.
p Items marked with an asterisk (*) do not ap-
pear when the vehicle type is set to
“De-
fault Lorry ”.
! Name:
Touch this key to rename the profile.
! Fuel Consumption Urban*:
Enter the average consumption of your ve-
hicle when used in built-up areas. The unit
for consumption can be set in
“Regional”
settings.
! Fuel Consumption Rural*:
Enter the average consumption of your ve-
hicle when used on motorways. The unit for
consumption can be set in
“Regional” set-
tings.
! Engine Type*:
Select the engine and fuel type of your vehi-
cle. This helps in estimating the CO
2
emis-
sion.
! Fuel Price*:
Enter the average fuel price for travel cost
calculation. The currency can be set in
“Re-
gional
” settings.
! Max. Speed:
Set the maximum speed you travel with the
vehicle.
! Use Extended Settings:
Check this box to enable more settings for
the following parameters.
! Length:
Set the total length of the vehicle.
! Width:
Set the width of the vehicle.
! Height:
Set the height of the vehicle.
! Trailer:
Set if there is a trailer attached to the ve-
hicle.
! Maximum Allowed Weight:
Set the maximum allowed weight of the
vehicle.
! Actual Weight:
Set the actual weight of the vehicle.
! Freight:
Select one or more hazard types if the
vehicle carries dangerous material.
You can also set the following option:
! Confirm Parameters for Each Route Plan-
ning:
When enabled, the list of vehicle para-
meters always appears before route calcula-
tion. This helps you quickly adjust the
parameters when some of them (actual
weight, for instance) often change.
7 When finished modifying an existing
vehicle profile, touch [Back].
The settings are completed.
p While this profile is selected, the para-
meters of your vehicle are taken into ac-
count when planning routes.
For AVIC-F160 users
p Note that this navigation system leads to a
safe route for your lorry only if map data
contains the weight, height and etc. restric-
tions of the road network in your area.
p Speed limits for lorries may not be available
for all roads. It is advised to enter the maxi-
mum allowed speed in your area for your
vehicle instead of the maximum speed your
lorry is capable of.
<127075005641>43
Engb
43
Chapter
08
Checking
and
modifying
the
curre
nt
route
Checking and modifying the current route