Pioneer CNDV-1100HD - Manual (Page 5)

Touching this option switches the setting “On”
or
“Off”.
On*:
Calculates a route while avoiding streets or
bridges with traffic restrictions during a cer-
tain time.
Off:
Calculates a route while ignoring traffic re-
strictions.
3 Touch [OK].
The route is recalculated, and the Route con-
firmation screen appears.
p The system may calculate a route that in-
cludes streets or bridges that are subject to
traffic restrictions during a certain time
even if
“On” is selected.
CAUTION
If the time difference is not set correctly, the na-
vigation system cannot consider traffic regula-
tions correctly. Set the time difference correctly
(For details, refer to the Operation Manual of
your navigation system.)
shows for routes that contain streets or bridges
that are subject to traffic regulations during a certain
time when the setting
“Time restrictions” is “On”.
2D Twin Map View and 3D
Twin Map View
Either “2D Twin Map View” or “3D Twin
Map View ” can directly be selected in “View
Mode Selection ” screen.
1 Press the MAP button to display a map
of the area around your current position.
2 Press the MAP button again.
3 Touch the mode name to select the
mode you want to display.
2D Twin Map View
The 2D map appears on the left screen.
3D Twin Map View
The 3D map appears on the left screen.
p Touching anywhere on the map changes
the map to the Scroll mode.
Address Book Icon
You can select whether to display the icons for
the entries of
“Address Book” on the map.
p When you select “Address Book Icon Dis-
play ” in “Short-Cut Selection”, you can
switch this setting with the shortcut menu.
p Settings marked with an asterisk (*) show
that these are default or factory settings.
<CRB3938-A>17
Engb
Renewed points through
this upgrade
1 Touch the key in the following order in
the navigation menu.
[
Map] d [Displayed Info]
2 Touch [Address Book Icon].
Each time you touch the key changes the set-
ting.
! On*:
Displays the icon on the map.
! Off:
Hides the icon from the map.
p Even if “Address Book Icon” is set to
“Off”, the alarm sounds when you ap-
proach the registered location and the
set image pops up. To turn off the sound
output and image pop up, select
“No Sound” and “No Picture” for the
entry.
p If you set (dot), the registered name
of that entry can be displayed on the
map. The registered name does not ap-
pear if
“Address Book Icon” is set to
“Off”.
3D Landmark
You can select whether to display the 3D land-
mark on the map.
p 3D landmark only appears when the view
mode is “3D Twin Map View” and the
map scale is set to 200 m (0.25 mile) or
lower.
p Settings marked with an asterisk (*) show
that these are default or factory settings.
1 Touch the key in the following order in
the navigation menu.
[
Map] d [Displayed Info]
2 Touch [3D Landmark].
Each time you touch the key changes the set-
ting.
! On*:
Displays the 3D landmark on the map.
! Off:
Hides the 3D landmark on the map.
Traffic event icon and line
p Middle-sized icon is displayed on the map
scale between 2 km to 5 km (1 mile to
2.5 miles).
p The traffic-related items can be shown on
the detailed city map.
Hands-free phoning
Device name
The default device name displayed on the mo-
bile phone changes
“PIONEER NAVI” to
“PIONEER HDD NAVI”. (If you already con-
nected the Bluetooth unit, the name already
set remains. If you restore the default setting,
the device name becomes
“PIONEER HDD
NAVI ”.)
The display of an unknown user ’s call
Depending on the caller ID service, the phone
number of the received call may not be dis-
played. [
Unknown] appears instead in that
case.
<CRB3938-A>18
Engb
Renewed points through
this upgrade
Editing the entry in “Phone Book”
The default device name displayed on the mo-
bile phone changes
“PIONEER NAVI” to
“PIONEER HDD NAVI”. (If you already con-
nected the Bluetooth unit, the name already
set remains. If you restore the default setting,
the device name becomes
“PIONEER HDD
NAVI ”.)
Editing the entry in “Phone Book”
You can edit [ Pronunciation] to be used for
voice recognition along with [ Name], [Phone
#], or [Picture].
1 Touch [Info/Phone] in the Navigation
menu, and touch [Phone Menu].
2 Touch [Phone Book].
3 Touch or [Add].
The edit screen appears.
1 Name
Enter the name to be displayed in the
phone book. If you enter the name for new
entry, you can select whether you use this
entry as voice commands.
2 Pronunciation
You can enter the desired pronunciation in-
dependently from the name. The registered
pronunciation is used for voice recognition.
p Up to 40 characters can be input for the
pronunciation.
p If “Pronunciation” is blank, you cannot
use the item as a voice command.
p Depending on which language is being
switched to, you may not be able to use
the registered pronunciation without
modification.
3 Phone #
These operations are the same as before
upgrade.
4 Picture
These operations are the same as before
upgrade.
Changing a name
1 Touch [Name], then touch [Yes].
The message confirming whether or not to
register the entered name as voice command
is displayed.
When not registering a name as a voice com-
mand, select [
No].
2 Enter a new name, then touch [OK].
The current name appears in the text box.
3 If the pronunciation is suitable, touch
[Yes].
The details you set are registered, and
“Phone
Book Record Edit ” screen appears.
Alternative options:
No:
Completes the registration without editing the
pronunciation.
Repeat:
You can reconfirm the pronunciation of the
name you entered.
No sounds can be output during .
<CRB3938-A>19
Engb
Renewed points through
this upgrade
p If the pronunciation is not the desired one,
edit the characters so that the pronuncia-
tion matches your desired pronunciation.
p When you confirm the pronunciation, is
shown on the left side of the location name
displayed in the entries of
“Phone Book”.
This icon indicates that this name can be
used as a voice command during voice op-
eration.
Changing a pronunciation
1 Touch [Pronunciation].
2 Enter a new pronunciation, then touch
[OK].
The current pronunciation appears in the text
box (if already set).
3 If the pronunciation is suitable, touch
[Yes].
The details you set are registered, and
“Phone
Book Record Edit ” screen appears.
Alternative options:
No:
Cancels the editing.
Repeat:
You can reconfirm the pronunciation of the
name you entered.
Setting the time difference
The time difference can be set from “–4” to
“+9” hours.
Changing the background
picture
The customising of “Splash Screen” is added.
The operation is the same as “Navigation
Background ” or “AV Background”. Please
refer to the Operation Manual of the naviga-
tion system to operate.
Splash Screen:
The screen that appears when the Navigation
system starts up.
Precautions when changing the splash
screen
The following is the default splash screen for
the navigation system.
PIONEER Original
If an image other than the one shown above is
previously set (such as an image from the deal-
er or other source) and you change the splash
screen once, you must use the CD-R (-RW)
where the image is recorded to restore the pre-
vious splash screen.
DVD playback
Touching o or p resumes normal play-
back at a desired point during continuous fast
reverse/fast forward (when
or is
shown).
p You can also perform these operations by
using TRK (c/d) button.
<CRB3938-A>20
Engb
Renewed points through
this upgrade