Pioneer AVIC-75DV - Manual (Page 29)

27
Chapter
2
Basic Operation
Chapter
2
Basic Operation
Switching On and Off
Switching On
When the engine of your vehicle is running, the power of the main unit of your Navigation
System is turned on. After the opening screen appears for a few seconds, a cautionary mes-
sage appears. Read this message and click the OK or the TALK button; the map of your sur-
roundings appears, and you can now use the Navigation System.
➲
If the disc is not set, the message asking to insert the disc appears. After you set the disc
correctly, your Navigation System starts up.
When the password is set
After your Navigation System starts and the cautionary message appears, you are asked to
enter the password. Enter your password and select “OK”, and click the OK button. (You can-
not enter your password using numeric keypad of the Remote Control.) The map of your sur-
roundings appears, and you can use your Navigation System.
➲
For the details of setting the password, see “Registering a Password” on page 71.
Switching Off
When you turn your vehicle’s engine off, your Navigation System is also switched off.
➲
If you have not arrived at the vicinity of your destination, the route set will not be deleted
even if you turn the power to your Navigation System off.
CRB1654A_Eng.book Page 27 Thursday, September 20, 2001 4:30 PM