Pioneer AVIC-F320BT - Manual (Page 18)

Installation using the screw holes
on the side of the navigation unit
1 Remove the side brackets.
Side bracket
Screw for fixing the side bracket
(5 mm
 6 mm)
2 Fastening the navigation unit to the
factory radio-mounting bracket.
Position the navigation unit so that its screw
holes are aligned with the screw holes of the
bracket, and tighten the screws at 3 or 4 loca-
tions on each side.
Use the screws (5 mm × 8 mm) (sold sepa-
rately), depending on the shape of the brack-
et
’s screw holes.
Factory radio mounting bracket
If the pawl gets in
the way, bend it down
Dashboard or console
Screw
(5 mm × 8 mm)
(sold separately)
Engb
18
Section
04 Installation