Software update – Pioneer BDP-430 User Manual
Page 24
Software Update
The software can be updated in one of the ways
described below.
Updating using the network
•
Updating using a USB memory device
•
The settings below must be made in advance to
update the software using the network.
Product information on this player is provided on the
Pioneer website. Check this website for update and
service information on your Blu-ray disc player.
IN Europe:
http://www.pioneer.eu/
IN U.K.:
http://www.pioneer.eu/
http://www.pioneer.co.uk/
IN Russia:
http://www.pioneer.eu/
http://www.pioneer-rus.ru/
IN Hong Kong:
http://www.pioneerhongkong.com.hk/
IN Singapore:
http://www.pioneer.com.sg/firmwaredownload
NOTE
Check that the LAN cable, USB Wireless LAN Adaptor or
•
USB memory device is properly connected (page 11).
Properly set the “Communication Setup” (page 22).
•
Depending on the network connection conditions and other
•
factors, some time may be required to download the update file.
CAUTION
Do not disconnect the LAN cable, USB Wireless LAN Adaptor or
•
USB memory device or unplug the power cord while the update
file is being downloaded or the software is being updated.
Do not perform other operations while the software is being updated.
•
Also note that updating cannot be canceled once it is started.
If you have turned off the front panel display, use
•
FRONT
LIGHT
to turn it on. When updating the software with the
front panel display turned off, do not unplug the power
cord until the FL OFF indicator turns off.
Updating using the network
Use this procedure to connect to the network and
check whether new software is available.
Press
1
HOME MENU
to display the HOME
MENU.
Press
2
to select “Settings”, then press
ENTER
.
Press
3
to select “Software Update”, then
press ENTER.
Press
4
ENTER
to move to the menu to the right.
Press
5
to select “Network”, then press
ENTER
.
“Accessing” flashes on the screen. If new software is
•
detected, the player’s current software version and the
new software version are displayed.
If the software has already been updated to the latest
•
version, a screen showing you the details is displayed.
Press
6
to select “Yes”, then press ENTER.
Software updating begins.
•
Once software updating is completed, the updating
•
completed screen appears. When ENTER is pressed,
the player restarts automatically.
If software updating fails, an error message is
•
displayed. Check that the LAN cable or USB Wireless
LAN Adaptor is properly connected and check the
communications settings, then update the software
again.
Updating using a USB memory
device
Use this procedure to update the player’s software
from a USB memory device containing the update file
connected to the USB port on the player’s front panel.
NOTE
When an update file is provided on the Pioneer website,
•
use your computer to download it onto a USB memory
device. Carefully read the instructions on downloading
update files provided on the Pioneer website.
The player supports USB memory devices formatted in
•
FAT32/16. When formatting a USB memory device on your
computer, do so with the settings below.
File system: FAT32
Allocation unit size: Default allocation size
Store the update file in the USB memory device’s root
•
directory. Do not store it within a folder.
Do not put any files other than the update file on the USB
•
memory device.
Only store the most recent update file on the USB memory
•
device.
Do not use a USB extension cable to connect a USB
•
memory device to the player. Using a USB extension cable
may prevent the player from performing correctly.
Remove any disc from the disc tray when updating the
•
software.
Settings
Check the software version.
9
To update the player’s software, select "Start" then
•
press ENTER.
If you do not want to update the player’s software,
•
disconnect the USB memory device. After this,
operate following the instructions on the screen.
If you want to update after selecting “Do not start”
•
or after the version confirmation screen was closed,
return to step 2.
Software update file is detected in the USB memory
device. Start update?
Current Ver. :
Update Ver. :
**1234567
**2345678
Yes
No
An error message is displayed if the USB memory
•
device could not properly recognized or if no update
file was found on the USB memory device. Check the
file on the USB memory device, then reconnect the
USB memory device properly.
Software update file is not detected in the USB memory device.
Confirm that you have transferred the file
to the USB memory device and retry software update.
Confirm that you have inserted the USB memory device
into the correct device.
OK
Press
10
ENTER
to update the software.
h
Now updating
Do not unplug AC cord.
Update Version
*
30%
**2345678
Check on the screen that updating has been
11
completed properly.
If updating fails, check the file on the USB memory
•
device, then start over from step 1.
Disconnect the USB memory device.
12
The player restarts automatically. If instructions appear
•
on the screen, operate following these instructions.
Connect the USB memory device.
1
When you insert or remove a USB memory device, be
•
sure to turn the main power off.
Be sure to connect your USB memory device to the
•
USB port on the player’s front panel. If your USB
memory devices are already connected to both the
USB ports on the player’s front and rear panels,
disconnect the USB memory device on the front and
replace it with the USB memory device which contains
the system firmware update file.
When an update file is found, the player’s current
•
software version and the version of the update file
stored on the USB memory device are displayed.
Proceed to step 9.
Press
2
HOME MENU
to display the HOME
MENU.
Press
3
to select “Settings”, then press
ENTER
.
Press
4
to select “Software Update”, then
press ENTER.
Press
5
ENTER
to move to the menu to the right.
Press
6
to select “USB Memory”, then press
ENTER
.
If no PIN code is set, proceed to step 8.
•
Input the 4-digit PIN code.
7
Use the number buttons (0 to 9).
•
Enter 4-digit PIN code
Press
8
ENTER
to check the data on the USB
memory device.
Insert USB memory device containing
the software update file.
OK
The screen message is displayed while the USB
•
memory device is being checked.
24