Pioneer DVH-330UB - Manual (Page 4)

When connecting to separately sold power amp
Connect with RCA cables
(sold separately)
Perform these connections when
using the optional amplifier.
Power amp (sold
separately)
System remote control

 

Blue/white (6*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
The pin position of the ISO
connector will differ depends on
the type of vehicle. Connect 5*
and 6* when Pin 5 is an antenna
control type. In another type of
vehicle, never connect 5* and 6*.
Blue/white (5*)
Rear speaker Rear speaker
This product Rear output
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
En
6
Section
01 Connections
When using a display connected to video outputs
WARNING
Never install the display in a location where it is
visible to the driver while driving.
Display with RCA
input jacks
(sold separately)
To video input
RCA cable
(sold separately)
This product Video output
En
7
English
Section
01 Connections
<QRD3085-A/N>4