Setting the clock, Setup, When rear view camera is connected to av input 2 – Pioneer AVH-P6800DVD User Manual

Page 89

Advertising
background image

When rear view camera is
connected to AV input 2

CAUTION

Pioneer recommends the use of a camera
which outputs mirror reversed images, other-
wise screen image may appear reversed.

You can install a rear view camera onto the AV
input 2 and display a rear view camera video.
When the gear shift is in REVERSE (R) posi-
tion, the video automatically switches to a rear
view camera video. (For more details, consult
your dealer.)

! After you set up the rear view camera set-

ting, move the gear shift in REVERSE (R)
and confirm if a rear view camera video
can be shown on the display.

! If the display should be switched to a rear

view camera video by error while you are
driving forward, change the rear view cam-
era setting.

! To end watching a rear view camera video

and return to the source display, press
V.ADJ.

1

Touch AV INPUT 2 on the setup menu.

2

Touch c or d on the AV INPUT 2 setting

to select B. CAMERA.

3

Touch c or d on the POLARITY setting

to select an appropriate setting for polar-
ity.
Each time you touch c or d it switches be-
tween the following polarity:

! BATTERY – When the polarity of the con-

nected lead is positive while the gear shift
is in REVERSE (R) position

! GND – When the polarity of the connected

lead is negative while the gear shift is in
REVERSE (R) position

Setting the clock

Use these instructions to set the clock.

1

Touch CLOCK ADJ on the setup menu.

2

Touch OFF to turn the clock display on.

ON will appear in the display instead of OFF.
Clock display is now on.

# To turn the clock display off, touch ON.

3

Touch c or d to select the segment of

the clock display you wish to set.
Each time you touch c or d it will select one
segment of the clock display:
Hour

—Minute

As you select segments of the clock display
the segment selected will be highlighted.

4

Touch a or b to set the clock.

Each time you touch a it increases the se-
lected hour or minute. Each time you touch b
it decreases the selected hour or minute.

Notes

! You can match the clock to a time signal by

touching

JUST.

— If the minute is 00 to 29, the minutes are

rounded down. (e.g.,

10:18 becomes

10:00.)

— If the minute is 30 to 59, the minutes are

rounded up. (e.g.,

10:36 becomes 11:00.)

! Even when the sources are off, the clock dis-

play appears on the display.

Setup

En

89

Section

18

Setup

Advertising