Pioneer SC-LX75 - Manual (Page 6)

En 6
01 Before you start
There are also other features enabling easy use
of various functions, including an Interactive
Manual that operates in association with the
receiver, updating of various types of software,
and MCACC Application that lets you check the
MCACC measurement results on 3D graphs.
Installing AVNavigator
1 Load the included AVNavigator
CD-ROM into your computer’s CD drive.
! The installation screen is displayed. Proceed
to step 2.
! If the installation screen does not appear,
double-click on the CD-ROM icon then start
the installer (AVNV_XXX_xxx.exe).
2 Follow the instructions on the screen
to install.
When “Finish” is selected, installation is
completed.
3 Remove the included AVNavigator
CD-ROM from the computer’s CD drive.
Handling the CD-ROM
Operating Environment
! This CD-ROM can be used with Microsoft ®
Windows ® XP/Vista/7.
Even when using an operating system other
than Windows ® XP, Vista or 7, the PDF file of
the operating instructions can be downloaded
from the CD-ROM. To do so, load the CD-ROM
into the computer’s drive then access its root
directory using Explorer. There are MANUAL.
pdf files in 6 languages.
! A browser is at times used for AVNavigator
functions. The supported browser is Microsoft
Internet Explorer 6, 7 and 8. With other
browsers, some functions may be limited or
the display may not appear properly.
Also, even with a supported browser,
depending on the browser’s settings, some
functions may be limited and the display may
not appear properly.
Precautions For Use
! This CD-ROM is for use with a personal
computer. It cannot be used with a DVD
player or music CD player. Attempting to play
this CD-ROM with a DVD player or music
CD player can damage speakers or cause
impaired hearing due to the large volume.
License
! Please agree to the “Terms of Use” indicated
below before using this CD-ROM. Do not use if
you are unwilling to consent to the terms of its
use.
Also agree to the “License Agreement”
displayed when installing AVNavigator.
Terms of Use
! Copyright to data provided on this CD-ROM
belongs to PIONEER CORPORATION.
Unauthorized transfer, duplication, broadcast,
public transmission, translation, sales,
lending or other such matters that go beyond
the scope of “personal use” or “citation” as
defined by Copyright Law may be subject
to punitive actions. Permission to use this
CD-ROM is granted under license by PIONEER
CORPORATION.
General Disclaimer
! PIONEER CORPORATION does not
guarantee the operation of this CD-ROM with
respect to personal computers using any
of the applicable OS. In addition, PIONEER
CORPORATION is not liable for any damages
incurred as a result of use of this CD-ROM
and is not responsible for any compensation.
The names of private corporations, products
and other entities described herein are the
registered trademarks or trademarks of their
respective firms.
worrying about obstacles or the direction
in which the remote control is pointing. For
details, see Flow for operating the receiver with
RF two-way communications on page 6.
! The maximum line-of-sight distance for RF
two-way communications is about 10 meters.
This line-of-sight communications distance is
a rough indication, and may differ according
to the surrounding environment.
Flow for operating the
receiver with RF two-way
communications
SC-LX85 only
This remote control unit is set for operations
using infrared signals upon shipment from
the factory. To set it for RF operations, take the
steps below.
1 Connecting the RF adapter to the RS-
232C and CU-RF100 terminals.
! Using the RF communications function on
page 5
2 Setting the ‘RF Remote Setup’ to ‘ON’.
! Switch on the receiver.
j
! Push gently on the lower third portion
of the receiver’s front panel, then press
HOME MENU.
j
! Use i/j to select System Setup, then
press ENTER.
j
! Use i/j to select Other Setup, then press
ENTER.
j
! Use i/j to select RF Remote Setup, then
press ENTER.
j
! Use k/l to select ON, then press
HOME MENU.
3 Pairing the RF adapter and remote
control.
! Press the SETTING button on the front of the
RF adapter. (RF adapter’s LED blinks red.)
j
! While pressing MULTI OPERATION, press
VIDEO PARAMETER on the remote control.
(The remote display shows PAIRING.)
j
! Press ENTER on the remote control. (When
pairing is successful, SUCCESS is displayed
and pairing is completed. RF adapter’s LED
lights green.)
4 Setting ‘RECEIVER MAIN’ to ‘RF MODE’
for the remote control unit’s ‘IR/RF SELECT’
setting.
! While pressing MULTI OPERATION, press
HOME MENU. (The remote display shows
SETUP MENU.)
j
! Use i/j to select IR/RF SELECT, then press
ENTER.
j
! Use i/j to select RECEIVER MAIN, then
press ENTER.
j
! Use i/j to select RF MODE, then press
ENTER.
j
! Press and hold MULTI OPERATION for
a couple of seconds to exit and store the
operation.
About using AVNavigator
(included CD-ROM)
The included AVNavigator CD-ROM contains
Wiring Navi allowing you to easily make the
receiver’s connections and initial settings in
dialog fashion. High precision initial settings
can be completed easily simply by following the
instructions on the screen to make the connec-
tions and settings.