Pioneer X-CM31-R - Manual (Page 11)

Connections 03
11
En
English
Français
Español
Connecting antennas
Connect the AM loop antenna and the FM wire antenna as
shown below. To improve reception and sound quality,
connect external antennas (see Using external antennas
below).
1 Connect the AM antenna wires.
Holding the connector to connect.
2 Fix the AM loop antenna to the attached
stand.
To fix the stand to the antenna, bend in the direction indicated
by the arrow (fig. a) then clip the loop onto the stand (fig. b).
3 Place the AM antenna on a flat surface and
in a direction giving the best reception.
4 Connect the FM wire antenna into the FM
antenna socket.
For best results, extend the FM antenna fully and fix to a wall
or door frame. Don’t drape loosely or leave coiled up.
Using external antennas
To improve FM reception
Use a PAL connector (not supplied) to connect an external
FM antenna.
Plugging in
Before making or changing the connections, switch off the
power and disconnect the power cord from the AC outlet.
After you’ve finished making all connections, plug the unit
into an AC outlet.
CAUTION
• Do not use any power cord other than the one supplied
with this unit.
• Do not use the supplied power cord for any purpose
other than that described below.
AM
LOOP
ANTENNA
FM
UNBAL 75 Ω
2
1
3
4
fig. a fig. b
ANTENNA
FM
UNBAL 75 Ω
One-touch PAL
connector
75 Ω coaxial
cable
VIDEO LINE
AC IN
OUT IN SPEAKERS
L
R
R L
To AC outlet
This unit’s rear panel
Power cord
X-CM31_SYXE8_En.book 11 ページ ２０１２年６月７日 木曜日 午後２時４分
YOM2001450001.pdf 11 2012/7/5 10:44:08