Power amp (sold separately), When installing the microphone on the sun visor, Connections – Pioneer DEH-6400BT User Manual

Page 4: Installing the microphone

Advertising
background image

Power amp (sold separately)

Perform these connections when using the op-
tional amplifier.

1

1

3

2

4

3

8

5

5

3

2

6

7

7

9

9

2

1

1 System remote control

Connect to Blue/white cable.

2 Power amp (sold separately)
3 Connect with RCA cable (sold separately)
4 To Rear output
5 Rear speaker
6 To Front output
7 Front speaker
8 To subwoofer output
9 Subwoofer

CAUTION

It is extremely dangerous to allow the micro-
phone lead to become wound around the steer-
ing column or shift lever. Be sure to install the
unit in such a way that it will not obstruct driv-
ing.

Note
Install the microphone in a position and orienta-
tion that will enable it to pick up the voice of the
person operating the system.

When installing the
microphone on the sun visor

1

Install the microphone on the micro-

phone clip.

1

2

1 Microphone
2 Microphone clip

2

Install the microphone clip on the sun

visor.
With the sun visor up, install the microphone
clip. (Lowering the sun visor reduces the voice
recognition rate.)

2

1

1 Microphone clip
2 Clamp

When installing the
microphone on the steering
column

1

Install the microphone on the micro-

phone clip.

1

2

3

4

1 Microphone
2 Microphone base
3 Microphone clip
4 Fit the microphone lead into the groove.

# Microphone can be installed without using mi-
crophone clip. In this case, detach the microphone
base from the microphone clip. To detach the micro-
phone base from the microphone clip, slide the mi-
crophone base.

Connections

4

Section

Installing the microphone

En

02

03

Advertising