Bakers Pride D-250 DSP - Manual

STANDARD FEATURES
OPTIONS & ACCESSORIES
SPECIFICATIONS
BAKERS PRIDE D Series DSP Deck Ovens are ideal for display
cooking and exhibition kitchens. These ovens are designed and
engineered to be "built-in" behind brick stone or tile applied directly
to ovens exterior or finished and trimmed in brass, copper, stainless
or powder-coated trim.
Ovens may be stacked two high. Oven exteriors are all heavy-
gauge, type 403 stainless steel and are fully insulated up to 5"
(127mm) thick for cooler outer temperatures and consistent interior
temperatures.
Interior oven frame is constructed of 1/4" (6mm) heavy-duty angle
iron frame, completely welded to form a single, unitized section.
The oven body and lining are then welded to the framework.
Oven interiors are manufactured of high-heat resistant 16-gauge
aluminized steel. Doors are fully insulated, spring balanced to
remain open or closed until moved and are finished in black powder
coat with hard wood handles.
All models feature independent, operator-controlled top & bottom
heat control dampers and micro slides for perfectly balanced
results.
D Series features a 300°-650° F (149°-343°C)
thermostat,
10 3/4" (273mm) interior deck height with
hearth stone decks (steel decks optional) and are supported by a
1/4" (6mm) angle iron frame.
Combination gas control incorporates a manual gas valve, safety
and pressure regulator. Easily removable, slide-out, heavy-duty
flame diverters distribute the burner flame uniformly in the burner
chamber. A 3/4" (19mm) NPT gas connection is located on the left
side and left rear of oven - operator/installer may choose.
Heavy-duty, 7-gauge hot rolled steel legs are standard and finished
with durable Bakertone gray paint.
2 Year limited part and labor warranty standard.
throttling
1 1/2" (38mm) thick
pilot
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
D Series @ 125,000 BTUH per deck natural gas or 105,000
BTUH in LP gas (LP gas not CE certified)
q 300°-650° F (149°-343°C) throttling thermostat
Top & bottom heat control dampers & micro-slides
Combination gas controls with valve, regulator & safety pilot
Heavy-duty, slide-out flame diverters
10 3/4" (273mm) interior deck heights with 1 1/2" (38mm)
thick stone hearth decks
All stainless steel exteriors
Aluminized steel interiors
Spring balanced, fully insulated doors finished in black powder
coat with custom hard wood handles or stainless steel with
tubular steel handles
Front or side mounted controls with large, hinged access
cover in black powder coat or stainless steel
Riser top - removable for field installation
Front & side skirts
Left side or rear gas connections on models with front
mounted controls - rear gas connection only on models with
side mounted controls
7-Gauge legs
Fully insulated throughout
2 Year limited part and labor warranty
q
q
q
q
q
q
q
q
q
q
Steel decks
150°-550° F (65°-288°C) bake thermostat
Set of 4 casters - two with locks - not for use with skirts
Stainless steel leg covers
Special height legs
Automatic oven starter
Draft flue for direct vent (not available on CE units)
Black powder coated doors with hard wood handles
Black powder coated hinged control access door panel
Without dome and/or without skirts
BAKERS
PRIDE
q
Model D-125 DSP Single
q
Model D-250 DSP Double
SUPER DECK
D-DSP SERIES
GAS DECK OVENS
BAKERS
PRIDE
Continuous product improvement is a policy of Bakers Pride Oven Company.
Therefore, specifications and design are subject to change without notification
BAKERS PRIDE OVEN COMPANY, INC.
30 Pine Street, New Rochelle, NY 10801
914/576-0200 • 1-800-431-2745 • fax 914/576-0605
www.bakerspride.com
GAS DECK OVENS
G
CERTIFICATIONS
CANADIAN GAS ASSOCIATION
DESIGN
CERTIFIED
CERTIFIED
®
Job ____________ Item # ___________
10"
INTERIOR
DECK HEIGHT
D-125 DSP
shown without top riser
and without skirts